645360
6
Zoom out
Zoom in
Previous page
1/10
Next page
POWX324 EN
Copyright © 2016 VARO P a g e | 6 www.varo.com
7.3 Fitting the advanced filter (Fig. 1)
The advanced filter is suitable for collecting small waste material and dust.
Remove the motor housing (3).
Place the new advanced dust filter at the underside of the motorhousing.
Push to lock filter.
Re-fit the motor housing.
7.4 Fitting a dust bag (Fig. 2)
A dust bag is suitable for collecting small waste material and dust.
Remove the motor housing (3).
Place a dust bag on the connection (7). Make sure to slide the opening past the raised
edge.
Re-fit the motor housing.
7.5 Fitting and removing the motor housing
The motor housing has been locked to the tub with clamps.
To remove the motor housing (3). first remove the clamps (5) and then lift it from the tub
(6).
To re-fit the motor housing, place it on the tub and tighten the clamps.
7.6 Mounting the tube to the hose
Slide the tube on the handgrip.
Place the required nozzle on the tail end of the tube.
7.7 Connecting an electrical tool (Fig. 3)
The machine has been equipped with an electronic outlet for connection of your electrical
equipment. The machine is switched on automatically the moment you switch on the electrical
tool.
Connect the hose (9) directly to the dust extraction outlet of the electrical tool.
Insert the mains plug of the electrical tool into the outlet (2).
Press ‘I’: Start power tool on power socket, the vacuum cleaner will start immediately.
Stop the tool, then the vacuum cleaner will also stop at once.
Press ‘II’: Start power tool on power socket, the vacuum cleaner will start after 3-4
seconds. Stop the tool, the vacuum cleaner will stop after 8 seconds.
Press ‘0’: Vacuum cleaner stop, but tool can work without vacuum cleaner
8 OPERATION
Make sure the power cord has been fully unwound before you switch on the machine. The air
leaving the grids must not be hindered.
When using the machine in combination with an electrical tool, switch on the machine first and
then the electrical tool.
If the electrical tool has been connected to the electronic outlet , directly switch on the
electrical equipment.
Use the crevice nozzle for vacuuming up dust from narrow and confined spaces.
When vacuuming up liquids, make sure the nozzle is not fully submerged in the liquid to be
vacuumed up.
Clean the machine after use according to instructions and wind the power cord around the
shell.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX324 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX324 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX324

Powerplus POWX324 User Manual - German - 10 pages

Powerplus POWX324 User Manual - Dutch - 10 pages

Powerplus POWX324 User Manual - French - 10 pages

Powerplus POWX324 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info