582377
5
Zoom out
Zoom in
Previous page
1/9
Next page
POWX230 EN
Copyright © 2015 VARO P a g e | 5 www.varo.com
If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of these devices can reduce dust related
hazards.
5.4 Power tool use and care
Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
Maintain power tools. Check for misalignment or sticking of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could lead to a hazardous situation.
5.5 Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
6 ADDITIONAL SAFETY INSTRUCTIONS FOR TILE CUTTERS
Make sure that the cutting disc is correctly screened by the guard.
Never remove the riving knife. The distance between the cutting disc and the riving knife
should not exceed 5 mm.
Do not use cutting discs which are bent, deformed or otherwise damaged.
Do not use cutting discs which do not comply with the specifications stated in this manual.
Never start cutting tiles before the machine reaches full speed.
Never attempt to cut extremely small workpieces.
Do not leave the work area until the machine has been switched off and the cutting disc
has come to a complete standstill.
Never attempt to stop the cutting disc by exerting pressure on the side of the disc.
Always unplug the machine before performing any maintenance.
Do not use the machine before it has been completely assembled and installed according
to the instructions.
Do not perform any design, assembly or Construction activities on the table while the
machine is switched on.
Unplug the machine and clean the table before leaving the work area.
6.1 Power supply
This tile saw must be connected to an earthed 230V - 50Hz power source.
This power source must be secured by a 16A fuse.
Your machine is supplied with a 30mA residual current device to protect the user against
electric shock.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX230 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX230

Powerplus POWX230 User Manual - German - 11 pages

Powerplus POWX230 User Manual - Dutch - 10 pages

Powerplus POWX230 User Manual - French - 10 pages

Powerplus POWX230 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info