675038
14
Zoom out
Zoom in
Previous page
1/16
Next page
POWX225 EN
Copyright © 2019 VARO P a g e | 14 www.varo.com
Possible causes
Corrective action
There is gum or pitch on the
table causing erratic feeding.
Clean the table with turpentine
and coarse steel wool and apply a
coat of automotive polishing wax.
The rip fence is out of
alignment.
Align the rip fence with the miter
gauge slot.
The splitter is not aligned
correctly with the blade.
Align the splitter with the blade.
The work piece is being fed
without the rip fence.
Install and use the rip fence.
The splitter is not in place.
Install and use the splitter (with
the guard)
The blade is dull.
Replace the blade.
The operator is letting go of
the material before it has
passed the saw blade.
Push the material all the way past
the saw blade before releasing
the work piece.
The miter angle locking knob
is loose.
Tighten the knob.
There is sawdust and/or dirt
in the raising and tilting
mechanisms.
Brush or blow out any loose dust
and dirt.
The extension cord is too
light or too long.
Replace with the proper size of
extension cord.
The voltage from the outlet is
too low.
Contact the electricity supplier.
The saw is not mounted
securely to the workbench.
Tighten all mounting hardware.
The stand is on an uneven
surface.
Reposition the table saw on a flat
level surface.
The blade is damaged.
Replace the blade.
13 TECHNICAL DATA
Mains supply
220-240 V ~ 50 Hz
Rated input
2200W S6 20%
No load speed
4800min-1
Tilting range
0-45°
Max. cutting depth
90°
75mm
45°
50mm
Table size
640x640mm
Table size with extensions
640x920mm
Connection cable
3m
Blade
254x30x2.8mm, 40T
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX225 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX225 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX225

Powerplus POWX225 User Manual - German - 18 pages

Powerplus POWX225 User Manual - Dutch - 16 pages

Powerplus POWX225 User Manual - French - 16 pages

Powerplus POWX225 Additional guide - All languages - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info