POWX2040 EN
Copyright © 2022 VARO P a g e | 3 www.varo.com
JOINTER PLANER 204MM
POWX2040
1 APPLICATION
This jointer-planer can be used for all kinds of truing and finishing work in wood, e.g., facing,
straightening. thinning, planing and jointing of natural wood up to 204 mm in width.
It is not designed for commercial use.
Use this tool only for the type of work for which it has been designed.
Any use other then those indicated in this manual is a misuse.
In the event the user alone is responsible for damages or injuries stemming from such misuse.
The manufacturer shall not be held responsible for any modification made to the tool or for any
damage that might result from said modifications.
Finally, use of this planer in accordance with the instructions in the present manual does not in
itself guarantee the elimination of all residual risk factors.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG A)
1. Infeed table
2. Outfeed table
3. Cutter shaft
4. Cutter shaft cover
5. Cutter shaft cover locking knob
6. Gear cover
7. Parallel guide
8. Thicknessing height lever
9. Planing scale
10. Dust extraction hood
11. Rubber feet (4x)
12. Planing depth knob
13. Power switch
14. Power cable storage
15. Push stick storage
16. Overcurrent protection reset button
17. Thicknessing table infeed
18. Thicknessing table outfeed
19. Extendable support
3 PACKAGE CONTENT LIST
▪ Remove all packing materials
▪ Remove remaining packaging and transit supports (if existing)
▪ Check the completeness of the packing content
▪ Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
▪ Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1x planer thicknesser
1x parallel guide (+2x M5 bolts)
1x cutter shaft cover
1x cutter shaft cover arm (+ 1x screw & washer + 1x M6 bolt & wingnut)
1x cutter shaft cover wing nut
1x dust extraction hood
1x 100mm dust extraction adapter