480959
5
Zoom out
Zoom in
Previous page
1/11
Next page
POWX152 EN
Copyright © 2017 VARO P a g e | 5 www.varo.com
If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
5.4 Power tool use and care
Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
Do not use the power tool if the switch cannot turn it on and off. A power tool with a
broken switch is dangerous and must be repaired.
Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
Maintenance. Check for misalignment or jammed moving parts, breakages or any other
feature that might affect the operation of the power tool . If it is damaged, the power tool
must be repaired . Many accidents are caused by using poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 ADDITIONAL SAFETY INSTRUCTIONS FOR BENCH DRILLS
Only connect the machine to an earthed mains supply. Only use tree-core extension
cords.
Always wear safety goggles, and a hairnet for long hair.
Do not wear gloves, ties or loose clothing.
While drilling, never hold the workpiece by hand, but firmly tighten it to the drilling table
using a vice e.g. Never keep your fingers on a place where they could touch the drill in
case the workpiece should move unexpectedly.
Do not use the machine until it has been mounted and installed completely according to
the instructions.
Do not switch on the machine while moving the head relative to the table or vice versa. Do
not switch on the machine until having checked that head and table have been tightened
firmly to the pillar.
Do not use the machine if a part is damaged or badly functioning.
Adjust the table or depth stop to prevent the drill from entering the table. Do not perform
any design, assembly or construction activities on the table while the machine is switched
on.
Make sure that the chuck key (if applicable) has been removed before switching on the
machine.
Before switching on the machine, make sure the chuck has been mounted correctly, the
drill has been mounted into the chuck firmly and the safety guard has been shut.
In operation, use the recommended speed for the drilling accessories and the material.
Switch off the power, remove the drill and clean the table before leaving the machine.
Lock the on/off switch when leaving the machine.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX152 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX152 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX152

Powerplus POWX152 User Manual - German - 11 pages

Powerplus POWX152 User Manual - Dutch - 11 pages

Powerplus POWX152 User Manual - French - 11 pages

Powerplus POWX152 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info