795790
1
Zoom out
Zoom in
Previous page
1/2
Next page
POWX147 EN
Copyright © 2021 VARO 1 www.varo.com
HOT GLUE GUN
POWX147
1 INTENDED USE
This glue gun is intended for gluing work pieces with a hot-melt adhesive. This tool is
especially suitable for spot-gluing or small-surface connections and glued seams. Not
suitable for professional use.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your power tool should
only be given to other users together with these instructions.
2 DESCRIPTION (FIG. A)
1. Nozzle
2. Heating indicator
3. Charging port
4. Switch button
5. Charging and power indicator
6. Glue stick inlet
7. Soft grip
8. Trigger
9. Removable stand
10. USB cable
11. Charging plug
12. Glue stick
3 BEFORE FIRST USE
NOTE: This tool is pre-set to shipping mode (dormant state) which is to
avoid the battery from discharging due to unintended operation and to
avoid the risk of fire. For this reason the switch cannot be used to start the
tool.
Before first use, the hot glue gun must be awakened by connecting the adapter to the power
supply, the charging indicator (5) shows red, the tool can be used normally after unplug the
adapter.
It is recommended that reset the tool to shipping mode when transport or storage. Press
and hold the switch button (4) 5-8 s, release it after the red indicator (5) flashes 3 times and
make sure that the switch does not work.
3.1 How to recharge the glue gun
NOTE: During charging the battery will become warm as it is being charged.
The battery supplied with this tool contains a test charge only and must be
fully charged before use. First read the safety instructions then follow the
charging instructions.
Connect the power supply to a suitable mains socket (important hints: check the voltage
on the model plate of the adapter).
Plug the charging plug (11) into the charging port (3) on the top of this glue gun.
Charge time is approx. 2-3 hours.
When the battery is charging, the RED indicator (5) keeps illuminate.
When fully charged, the indicator (5) will become green until unplug the adapter (10)
from the mains socket, the glue gun is ready to use.
NOTE: Do not allow the cable to become knotted or kinked.
Unplug the adapter when not in use and store it in a suitable storage cabinet.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX147 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX147 in the language / languages: English as an attachment in your email.

The manual is 0.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX147

Powerplus POWX147 User Manual - German - 2 pages

Powerplus POWX147 User Manual - Dutch - 2 pages

Powerplus POWX147 User Manual - French - 3 pages

Powerplus POWX147 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info