645093
4
Zoom out
Zoom in
Previous page
1/8
Next page
POWX139 EN
Copyright © 2016 VARO P a g e | 4 www.varo.com
5.4 Power tool use and care
Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
Do not use the power tool if the switch cannot turn it on and off. A power tool with a
broken switch is dangerous and must be repaired.
Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or jammed moving parts, breakages or any
other feature that might affect the operation of the power tool. If it is damaged, the power
tool must be repaired. Many accidents are caused by using poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 MACHINE-SPECIFIC SAFETY WARNINGS
Always hold the tool with it’s insulated grip.
The operator should hold the tool with two hands firmly.
Make sure the tool is switched on before you touch the workpiece with the sanding belt.
Do not touch any rotating components of the tool.
This machine is not waterproof, so do not add water at the surface of work piece.
When it comes to sanding operations, it is necessary to ensure a well-ventilated work
area.
Some of the material contained in the compounds may be toxic.
Be sure to use the dust masks / respirators corresponding of the material being
processed.
7 ASSEMBLY
7.1 Installation of the powerfile arm (Fig 1, 2, 3 and 4)
1. Before the installation: place the power file on its side as shown below
2. Insert spring as shown
3. Fix the strut arm
4. Install the belt track adjustment knob
7.2 Installation and removal of belt (Fig 5)
Make sure the machine is turned off and unplugged before installing or removing the belt.
Pull the tension spanner to the back. Put the belt on the driving wheel and pull the belt to
the front of the arm, and then make the belt slip to the belt wheel before pulling the
tension spanner back to the forward position.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX139 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX139 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX139

Powerplus POWX139 User Manual - German - 9 pages

Powerplus POWX139 User Manual - Dutch - 8 pages

Powerplus POWX139 User Manual - French - 8 pages

Powerplus POWX139 Additional guide - All languages - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info