A soldering iron is a hand tool most commonly used in soldering. It supplies heat to melt
the solder so that it can flow into the joint between two workpieces.
Soldering irons are most often used for installation, repairs and limited production work.
High-volume production lines use other soldering methods.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your power tool should
only be given to other users together with these instructions.
2 DESCRIPTION
1.Tip
2.Fixing screw
3.Handle
4.Power supply lead
5.Iron stand
3 OPERATING INSTRUCTIONS
Before taking the tool into use, make sure of the following:
Check thet voltage given on the nameplate is the same as the source of current
Before heating up make sure the bit is properly in position, the clamp screw must be
tighten.
Connect to appropriate main current.
The bit can only be removed when the soldering iron is switched off and without
using force. Bit to be inserted till stop.
Do not heat up soldering iron without bit.
After use let the soldering iron cool down in the air. ( do not cool off in water).
After use put the iron only down on a holder
The cable of the soldering irons is a special high quality cable. It is resistant against
short-time contact with hot metal parts. In case of damage the cable can not be
exchanged due to the special construction of the soldering iron. The iron can then no
longer be used according to the safety prescriptions.
3.1 Operation
Connect the plug to an outlet.
Put the soldering iron on the stand, until soldering tip is well heated.
Melt some soldering tin on the soldering tip.
Put the soldering tip to the point to be soldered.
Send some soldering tin to the point, until soldering tin melt.
Melt some tin to the other soldering part.
Solder the two parts together; avoid over heated, cool the soldering point.
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Powerplus POWX1381 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Powerplus POWX1381 in the language / languages: English as an attachment in your email.
The manual is 0,04 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
