645063
5
Zoom out
Zoom in
Previous page
1/9
Next page
POWX1170 EN
Copyright © 2016 VARO P a g e | 5 www.varo.com
Always disconnect the hammer drill from the electric supply before you change a chisel or
drill bit.
Protect your eyes and other workers from flying particles and splinters. Wear a helmet! Set
up partition walls!
Wear work gloves to protect fingers from bruising and grazing.
Vibrations can injure the hand-arm system. Keep exposure to vibrations as short as
possible.
Always lead the mains cable away backwards from the device.
Store the device where it is inaccessible to children.
When carrying out work, always hold the device with both hands and ensure that you have
a stable standing position.
7 BEFORE STARTING WORK
Examine the place where the device is to be used for hidden electrical cables, gas and
water pipes using a pipe finding device.
Before connecting to the mains, ensure care that the mains voltage corresponds to the
details on the rating plate.
7.1 Fitting and changing tools (Fig. 1)
The device is equipped with a SDS- plus attachment system.
Clean tools and grease with a thin layer of machine grease before fitting.
For assembly:
Pull back fastening sleeve (A) and hold.
Push and rotate the dust-free tool into the tool holder as far as it will go. The tool will lock
automatically.
Check that it has locked by pulling the tool.
Removing SDS-plus tool
Pull back fastening sleeve (A), hold and remove tool.
Accessories can be hot after use. Don’t touch the tip of accerroty by hand!
Always use protective gloves to remove the accessory!
7.2 Mounting/Dismount the auxiliary 13mm chuck for drilling in steel, wood and
plastic (Fig. 2)
Mount:
Pull back and hold the locking sleeve A of the SDS chuck.
Clean the adapter shank and put a bit of grease on it.
Push the auxiliary chuck into the SDS chuck.
Turn slowly to the right.
Release the locking sleeve A.
Dismount:
Pull back fastening sleeve (A), hold and remove tool.
7.3 Depth guide (Fig. 3)
Your drilling depth can be pre-set and/or repeated by using the depth stop.
Insert the required drill bit. Fit the depth stop into the hole of auxiliary handle and set the
required depth
7.4 Dust cover (Fig. 4)
Slide the dust cover device over the drill bit before carrying out any hammer drilling vertically
above your head.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX1170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX1170 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX1170

Powerplus POWX1170 User Manual - German - 10 pages

Powerplus POWX1170 User Manual - Dutch - 9 pages

Powerplus POWX1170 User Manual - French - 10 pages

Powerplus POWX1170 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info