645364
5
Zoom out
Zoom in
Previous page
1/8
Next page
POWX084 EN
Copyright © 2016 VARO NV P a g e | 5 www.varo.com
7 OPERATION
7.1 Preparatio((Fig 2)
Always unplug the machine from the mains before fitting a mixer bar.
First screw mixer part (6a) together with mixer part (6b). Screw the mixer (6) into the mixer
holder (5) afterwards. Use the two spanners to do this. Use one of the spanners (a) to hold the
mixer holder (5) in place and then use the second spanner (b) to tighten
up the mixer (6). Proceed in the reverse sequence to undo the mixer.
Always use a mixer bar that is suitable for the material to be mixed/stirred.
Using an unsuitable mixer bar can unnecessarily overload both the
machine and yourself.
To remove the mixer bar, unscrew it from the mixer
spindle in an anticlockwise direction. The mixer bar can
become rather tight in the holder. In that case, use a spanner
to keep the holder from turning.
7.2 Switching on and off
To switch the tool on, press the switch (1) and hold it down. To switch the tool off, release the
switch (1).
7.3 Continuous operation
To switch on continuous operation: press the switch (1) up to the stop and at the same time
press the locking button (2). The switch (1) locks, and continuous operation is activated.
To switch off continuous operation: press the switch (1) again and then let go. The lock on
the switch (1) is released, and continuous operation is deactivated.
7.4 Speed preselection
The speed can be preselected steplessly with the speed controller (7).
The necessary speed depends on the type of material you wish to mix; we recommend prac-
tical testing to determine the right speed.
7.5 Gear selector switch
Two speed ranges can be selected with the gear selector switch (5) :
Gear 1 180 min-1 to 460 min-1,
Gear 2 300 min-1 to 700 min-1
It is possible to change gear when the machine is running. However, this should not be done
when the machine is at full load.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX084 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX084 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX084

Powerplus POWX084 User Manual - German - 8 pages

Powerplus POWX084 User Manual - Dutch - 8 pages

Powerplus POWX084 User Manual - French - 8 pages

Powerplus POWX084 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info