795413

Powerplus POWX07588 Manual

11
Zoom out
Zoom in
Previous page
1/14
Next page
POWX07588 EN
Copyright © 2022 VARO P a g e | 11 www.varo.com
Remain at least 3 cm. from the front of the saw blade before you switch on
thmotor. The side of the wood which is against the fence must be
completely straight. Keep your hands at least 10 cm away from the saw
track to be followed.
▪ Switch on the motor and wait until the saw blade has reached the maximum speed before
you start sawing.
▪ While you press the wood against the bench and the fence, you can carefully push the
wood through the saw blade without forcing it.
▪ Never pull the workpiece backwards. If necessary, switch off the motor first without
altering the position of the workpiece.
9.5.2 Crosswise sawing
▪ Remove the fence and apply the cross-cut fence in the righthand carriage.
▪ Adjust the height of the saw blade (see lengthwise sawing).
▪ Press the workpiece against the cross-cut fence and keep at least 2,5 cm distance from
the front of the saw blade.
▪ Switch on the motor and wait until the maximum speed has been reached.
▪ Press the workpiece against the fence and the bench. Carefully push the wood through
the saw blade. Continue until behind the saw blade. Then switch off the motor and keep
this position until the saw blade has stopped completely before you remove the wood.
▪ Never pull the wood back. If necessary, switch the motor off and keep the position until the
saw blade has stopped completely.
10 CLEANING AND MAINTENANCE
10.1 Cleaning the device
Risk of electric shock! Never splash with water or expose to water. Never
use detergents or solvents to clean. These may cause irreparable damage
to the unit The plastic pieces may be corroded by the chemicals.
Careful treatment and regular cleaning will ensure that the unit remains functional and
performs well for a long time.
▪ Remove dirt with a brush.
▪ Wipe the tool with a damp cloth.
▪ Keep ventilation slots clean and free of dust
10.2 Unit maintenance
Risk of injury! Before conducting any maintenance work make sure the
device is unplugged (disconnect the power supply).
Risk of injury! Shortly after sawing, the saw blade may be very hot. Allow a
hot blade to cool down. Never dean a hot saw blade with flammable liquids.
A still saw blade can cause injury! Use gloves to change the saw blade.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX07588 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX07588 in the language / languages: English as an attachment in your email.

The manual is 0.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX07588

Powerplus POWX07588 User Manual - German - 15 pages

Powerplus POWX07588 User Manual - Dutch - 14 pages

Powerplus POWX07588 User Manual - French - 14 pages

Powerplus POWX07588 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info