582664
11
Zoom out
Zoom in
Previous page
1/14
Next page
POWX0561 EN
Copyright © 2014 VARO P a g e | 11 www.varo.com
Switch the plunge saw on and push the saw down. Cut the splinter guard continuously
over the entire length. The edge of the splinter guard now exactly matches the cutting
edge.
14 KICKBACK STOP
The kickback stop is designed to prevent operator injuries due to kickback.
When working with the guide rail the kickback stop (6) automatically clicks into place on the
base plate as soon as the base plate is placed on the guide rail. The kickback stop (6)
counteracts the movement if you try to guide the plunge saw on the guide rail back or if the
saw kicks back, e.g. due to the saw blade jamming.
Turn the spring-loaded screw of the kickback stop (6) towards 0 to manually unlock. Now
the saw can be moved forward and back.
Release the spring-loaded screw for the kickback stop to click into place on the guide rail
again.
After a kickback always check the guide rail for damages and dispose of a damaged guide rail
to prevent accidents.
15 PLUNGE CUT WITH GUIDE RAIL
Hold the plunge saw with both hands at hand grips (3) and (4).
Switch the plunge saw on and wait until it runs on full speed.
Push the saw slowly down and guide the saw towards the plunge position.
Note: The cutting width markings (15) at the side of the protective cover show the foremost
and rearmost cutting points of the saw blade at maximum cutting depth when using the guide
rail and a 165 mm diameter saw blade.
16 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
16.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
16.2 Checking and replacing the carbon brushes
The carbon brushes must be checked on a regular basis.
In case of wear, replace both carbon brushes at the same time.
Mount the carbon brush holders.
After mounting new carbon brushes, let the machine run at no load for 15 minutes.
Use only the correct type of carbon brushes.
16.3 Lubrication
From time to time, apply a drop of oil to the thread of the lock screw (17).
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0561 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0561 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0561

Powerplus POWX0561 User Manual - German - 15 pages

Powerplus POWX0561 User Manual - Dutch - 15 pages

Powerplus POWX0561 User Manual - French - 15 pages

Powerplus POWX0561 Additional guide - All languages - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info