645077
5
Zoom out
Zoom in
Previous page
1/8
Next page
POWX0360 EN
Copyright © 2017 VARO P a g e | 5 www.varo.com
7 OPERATING INSTRUCTIONS
7.1 Starting up (Fig. 1)
7.1.1 Instant response operation
Switching on: Press the On/Off switch.
Switching off: Release the On/Off switch
7.1.2 Continuous operation
Switching on: Press the On/0ff switch, keep pressed and lock with the locking button Switching
off: Press the On/Off switch and release
7.1.3 Electronic speed control setting
Using the speed regulator (4) on the top, you can pre-set any speed. Turn the speed regulator
(4) to a higher number for a higher speed and turn it to a lower number for a lower speed. The
ideal cutting rate depends on the specific material and working conditions.
The general standards for setting the cutting speed for power tools apply here.
Steel: slowest cutting speed
Aluminium, plastic, hardwood: medium cutting speed.
Soft wood: high cutting speed.
When processing metals you should use suitable lubricants/coolants to protect the saw blade
just a little oil for steel, and spirit or petroleum for aluminium, as required. For plastic material
water is normally sufficient as the coolant/lubricant.
7.2 Changing the saw blade (Fig. 2)
Push the blade holder with the blade clamp all the way to the front and than slide the blade
(with the teeth to the front) into the guide groove.
7.3 Adjusting the base (Fig. 3)
Loosen the base plate by pulling the lever for angle cutting adjustment which located on the
underside of the tool
Move the base plate forward and tilt it until the desired angle is obtained the angle can be
between 0°and 45°(left and right).
Move the base plate back to ensure the slot of base plate is engaged with gear casing.
Press the lever for angle cutting adjustment to lock position (original position) and ensure it
firmly.
For accurate cut it is necessary to make a trial cut, measure the work and reset the angle until
the correct setting is achieved.
7.4 Dust extraction
The jigsaw is equipped with a dust extractor socket. You can connect your vacuum cleaner to
the socket at the rear of the jigsaw. If you require a special adapter, please contact the
manufacturer of your vacuum cleaner.
7.5 Using the laser and LED-light (Fig. 4)
You can use LED-light to enlighten the approximity of the cutting position.
The laser beam projects a red cutting line on the workpiece.
Switch the laser on by means of the on/off switch (6).
Place the machine on the workpiece with the saw marking above the start of the cutting
line.
Check that the laser line aligns with the cutting line as marked on the workpiece.
Switch on the machine.
Follow the “Instructions for use” to perform a cut.
After use, switch off the laser.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0360 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0360

Powerplus POWX0360 User Manual - German - 8 pages

Powerplus POWX0360 User Manual - Dutch - 8 pages

Powerplus POWX0360 User Manual - French - 8 pages

Powerplus POWX0360 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info