582714
5
Zoom out
Zoom in
Previous page
1/8
Next page
POWX036 EN
Copyright © 2014 VARO P a g e | 5 www.varo.com
7.1.2 Continuous operation
Switching on: Press the On/0ff switch, keep pressed and lock with the locking button Switching
off: Press the On/Off switch and release
7.1.3 Electronic speed control setting
Using the knurled screw on the On/Off switch you can pre-set any speed. Turn the knurled
screw to a higher number for a higher speed and turn it to a lower number for a lower speed.
The ideal cutting rate depends on the specific material and working conditions.
The general rules for tool speed in cutting operations apply
7.2 Changing the saw blade
7.3 Adjusting the base
(For mitering and sawing near edges.) For mitre and bevel cuts you can swivel the base by up
to 45° in either direction after undoing the two screws on the bottom. The angles 15°, 30°and
45° are marked but you can adjust the saw to any angle between these markings as required.
To adjust the cutting angle. undo the two screws until you can just about move the blade.
Adjust to the required angle and re-tighten the two screws.
To enable you to saw right up to the edge, the base can be pushed backward. To do so, undo
the two screws underneath and push the base to the back. Re-tighten the two screws
7.4 Dust extraction
The jigsaw is equipped with a dust extractor socket. You can connect your vacuum cleaner to
the socket at the rear of the jigsaw. If you require a special adapter, please contact the
manufacturer of your vacuum cleaner.
7.5 Using the laser and LED-light
You can use LED-light to enlighten the approximity of the cutting position.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX036 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX036 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX036

Powerplus POWX036 User Manual - German - 9 pages

Powerplus POWX036 User Manual - Dutch - 8 pages

Powerplus POWX036 User Manual - French - 9 pages

Powerplus POWX036 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info