582285
5
Zoom out
Zoom in
Previous page
1/8
Next page
POWX0030LI EN
Copyright © 2014 VARO P a g e | 5 www.varo.com
In case of damage and improper use of the battery, vapors may be emitted. In case of
complaints, provide for fresh air and consult a physician. The vapors can irritate the
respiratory system.
7 OPERATION
7.1 Charging procedure
The battery charger supplied matches to the battery installed in the machine. Do not use other
battery chargers.
The Li-ion battery is protected against deep discharging. When the battery is empty, the
machine is switched off by means of a protective circuit: The bit holder no longer moves.
If the On/Off switch is subject to continued use, the battery can be
damaged.
The charging process starts as soon as the mains plug of the battery charger is inserted in the
socket and the machine is then connected to the battery charger.
The battery charge indicator lights up red to indicate the charging procedure. When the battery
is fully charged, the red light will switch off. Unplug the charger plug from the main socket, the
screwdriver is ready to use.
During the charging procedure, the handle of the machine warms up. This
is normal.
Do not use the machine during the charging procedure.
7.2 Inserting and extracting bits
Important! Always turn off the switch before you change the screw bit to avoid unintentional
starting of the machine. When the machine is completely stopped, insert or extract the screw
bit.
Only use tool bits which can be securely fastened in the chuck and for
which the bits has been designed.
Before using the machine check whether the screw-bit is inserted correctly.
Avoid over-tightening screws, otherwise the screw head may be damaged
or stripping of the threads may occur.
7.3 On/Off trigger
Use the On/Off trigger to start the machine and keep holding it for continuous operation.
The rotation speed can be varied by depressing the On/Off trigger. The more the trigger is
depressed, the faster the rotation speed is.
To switch the machine off, release the On/Off trigger
7.4 Changing the angle of the tool
The tool’s angle can be changed by pressing/pushing the release button and turn the handle
clockwise or counter-clockwise.
To change the tool’s angle, stop the machine and using the button.
Do not change the angle of the tool, when it is operating!
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0030LI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0030LI in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0030LI

Powerplus POWX0030LI User Manual - German - 9 pages

Powerplus POWX0030LI User Manual - Dutch - 9 pages

Powerplus POWX0030LI User Manual - French - 9 pages

Powerplus POWX0030LI Additional guide - All languages - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info