640916
2
Zoom out
Zoom in
Previous page
1/4
Next page
POWLI241 EN
Copyright © 2016 VARO P a g e | 2 www.varo.com
4.2 Wiring diagram
For mounting use a connection supply cable with N = blue, earth = green/yellow and
L = brown and connect as shown in fig 3. Srew the barrel nut of the srew cap so that
the packing tightens. The packing can be adjusted to a cable diameter of 8-11mm.
If you want continuous light you can add a switch. Please consult fig 4
4.3 Mounting
Check the correct way of mounting in fig 1.
Check the safety distance between the body and inflammable surface when wall or
corner mounted in fig. 2.
5 USING THE FLOODLIGHT
Turn the power back on.
6 SETTING THE LIGHT SYSTEM (FIG. 5)
6.1 Test mode
Turn the LITE control and the Time control anticlockwise to the edge (the TEST
position).
Set the SENS. Control to its mid-point.
Turn on the wall switch. The floodlight will turn on for about 1 minute to warm up.
Then it turns off.
Walk through the detection area. The floodlight turns on when you move and turns off
when you stop. Wait for the floodlight to turn off before moving again to test the
sensor.
Adjust the motion sensor to cover the desired detection area.
For a smaller coverage area, point the sensor down; for a larger coverage area, point
the sensor up.
6.2 TIME adjustment
The TIME adjustment controls how long the floodlight will stay on after the motion
has been detected.
Turn the TIME control knob clockwise to increase (up to about 12 minutes) how long
the floodlights stay on or anti-clockwise to decrease (down to about 5 seconds) the
time delay.
6.3 LITE adjustment
The LITE adjustment determines at what light level the lighting system will start
operating when you set the sensor to Automatic Operation.
Provisionally turn the LITE control knob to the edge clockwise at the moon (dusk)
position. In this provisional setting mode, the motion sensor remains inactive during
daylight. At dusk when you find it is the LUX level desired for operation, simply set
the LITE control knob to the position that the motion sensor will become active as
daylight declines.
6.4 SENS. adjustment
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWLI241 - LED FLOODLIGHT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWLI241 - LED FLOODLIGHT in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWLI241 - LED FLOODLIGHT

Powerplus POWLI241 - LED FLOODLIGHT User Manual - German - 4 pages

Powerplus POWLI241 - LED FLOODLIGHT User Manual - Dutch - 4 pages

Powerplus POWLI241 - LED FLOODLIGHT User Manual - French - 4 pages

Powerplus POWLI241 - LED FLOODLIGHT Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info