Manual Powerplus POWLI021 - HALOGEN FLOODLIGHT (page 2 of 4) (English)

640893

Zoom out

Zoom in

1/4

POWLI021 EN

 The fitting is to be mounted in such a way that the angle of inclination of the

longitudinal shaft of the lamp (burning position) is less than 4° with respect to the

ground area.

 Secure the fitting with two screws or bolts, out of reach and at a minimum height of

2.5m.

 The distance between the fitting and the object or surface to be illuminated is to be at

least 1m. In case you place the fitting under a canopy, a minimum distance of 0.2m,

measured from the top of the fitting to the under side of the canopy, is to be taken

into account.

 Do not mount the fitting to the ceiling.

 The grounding wire of the connection cable yellow/green must be connected to the

connection terminal, indicated with grounding symbol. The power wires are to be

fitted in the connection block.

 In order to mount or change the halogen lamp, the power must be switched off before

opening the safety glass. After this, secure the halogen lamp into the lamp holder.

The halogen lamp is never to be touched with bare hands.

 Secure the sealing rubber to guarantee the spatter resistance, and ensure that all

mounting screws are properly fastened.

 Installation height of this lamp should be between 1m and 2.5m.

5 WIRING DIAGRAM (FIG. 2)

Fix the wiring in the connection block according to the included diagram (Fig. 2):

a=brown conductor of the network cable (L)

b=blue conductor power cable (N)

c=yellow/green: grounding cable

d=control (red)

6 USING THE FLOODLIGHT

 Simply plug in the cable of the floodlight to the socket.

7 SETTING THE LIGHT SYSTEM (FIG. 3)

7.1 Test mode

 Turn the LITE control and the Time control anticlockwise to the edge (the TEST

position).

 Set the SENS. Control to its mid-point.

 Turn on the wall switch. The floodlight will turn on for about 1 minute to warm up.

Then it turns off.

 Walk through the detection area. The floodlight turns on when you move and turns off

when you stop. Wait for the floodlight to turn off before moving again to test the

sensor.

 Adjust the motion sensor to cover the desired detection area.

 For a smaller coverage area, point the sensor down; for a larger coverage area, point

the sensor up.

7.2 TIME adjustment

 The TIME adjustment controls how long the floodlight will stay on after the motion

has been detected.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWLI021 - HALOGEN FLOODLIGHT in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWLI021 - HALOGEN FLOODLIGHT

Powerplus POWLI021 - HALOGEN FLOODLIGHT User Manual - German - 4 pages

Powerplus POWLI021 - HALOGEN FLOODLIGHT User Manual - Dutch - 4 pages

Powerplus POWLI021 - HALOGEN FLOODLIGHT User Manual - French - 4 pages

Powerplus POWLI021 - HALOGEN FLOODLIGHT Additional guide - All languages - 1 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Powerplus POWLI021 - HALOGEN FLOODLIGHT Manual

Product: