667553
7
Zoom out
Zoom in
Previous page
1/10
Next page
POWEG9011 EN
Copyright © 2017 VARO P a g e | 7 www.varo.com
Use the blower as follows when working on slopes:
Keep the air outlet unobstructed and clean at all times.
Never direct the suction/blown air opening toward persons or animals.
7 ASSEMBLY
Your new blow/vac requires very little assembly work before it is ready for use.
Warning: if any part is missing or damaged, do not plug in the
machine until you have replaced the missing or damaged part.
7.1 Assembling the tubes (Fig. 1, 2)
Pull out the two tube sections, one blow/vac body and three screws that are in the
manual bag. The user needs to assemble the tube 2-2 insert into tube 2-1. Fasten the
screw until they connect well. Now you can put the whole tube into the machine body
and secure with the two other provided screws. Please note one with a short special
screw and one is an ordinary longer screw.
7.2 Shoulder belt
Attach the shoulder belt to the foreseen hook on the handle. To adjust the shoulder belt
to the required length, simply slide the adjustable strap buckle forward or backwards.
7.3 Collection bag (Fig. 3)
Before fitting the collection bag ensure that the blow - vacuum function selector lever
operates smoothly and that it is not obstructed by debris from the previous use.
Secure the hook of the collection bag to the tube and then install the entrance of debris
of the collection bag in the foreseen opening.
8 OPERATION
8.1 Steps prior to operation
Only operate the device after completely assembling it. Prior to each use, check the
power cord for signs of damage. Under no circumstances should the power cord be
used if it shows any signs of damage.
Ensure that the blow/vac is only connected to conventional sockets with a 230V
alternating current supply.
8.2 Switching ON/OFF (Fig. 4)
Press the On/Off switch to start machine.
To stop the machine simply let go of the On / Off switch.
8.3 Use/Operation
The easiest way to use the blow/vac is to place the shoulder belt in a comfortable
position over your shoulder and hold the rear handle at hip height so that the majority
of the tool’s weight rests on the rollers.
When using the blow/vac to pick up leaves it is best to move the tool on its rollers.
This ensures that the blow/vac is at the perfect height above the ground. The
blow/vac is designed only to pick up leaves. To avoid damage to the tool that is not
covered by the warranty, do not use it to pick up branches, stones or other hard
materials.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWEG9011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWEG9011 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWEG9011

Powerplus POWEG9011 User Manual - German - 12 pages

Powerplus POWEG9011 User Manual - Dutch - 12 pages

Powerplus POWEG9011 User Manual - French - 12 pages

Powerplus POWEG9011 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info