676321
5
Zoom out
Zoom in
Previous page
1/8
Next page
POWE30030 EN
Copyright © 2017 VARO P a g e | 5 www.varo.com
When removing the saw blade, follow the above procedure in reverse order.
Before plugging in power cord, always pull on the blade to make sure it is
securely locked in the clamp. Failure to do so may result in serious injury.
8 OPERATION
8.1 Switch on/off (4)
Connect the plug to the power supply. The power-on indicator (8) is illumed until the tool
disconnect from the power mains.
Turn on or turn off the tool by squeezing or releasing the ON/OFF switch trigger (4).
For continuous operation just press the lock-on button (5) on the left side of the handle.
The lock-on button can be release by pressing the switch trigger again.
8.2 To change position of the pivot shoe assembly (Fig 2)
Unplug your saw.
WARNING: Failure to unplug your saw could result in accidental starting
causing serious injury.
Loosen the both cap screws (8) in the gear frame with hex key.
Reposition pivot shoe (1) assembly in or out.
Retighten both cap screws (8) securely. Do not over tighten cap screws (8).
Remove hex key.
WARNING: Cutting into electrical wiring in walls can cause blade, blade
clamp, and saw bar assembly to become electrically live. Do not touch
metal parts when cutting into a wall; grasp only the insulated gripping
surfaces provided by the tool. Make sure hidden electrical wiring, water
pipes, and mechanical hazards are not in the blade path when cutting into a
wall.
8.3 Grip position adjustment (Fig 3)
Push the button backward as the direction of arrow shows on the Fig. 3 and rotate grip to left
or right at the same time.
There are five positions in all.
8.4 General cutting
Clamp your work piece if it is portable. Rest the front shoe of the saw on your work piece (be
sure the blade is not contacting the work piece) and start the saw, exerting enough pressure in
the direction of the cut to keep the shoe pressed firmly against the work piece at all times. Do
not force the cut or stall the saw. Don’t bend or twist the blade, let the tool and the blade do
the work.
In general, coarser blades are for wood, plastics, and composites, and finer blades are
for cutting metal. Chattering or vibration may indicate you need a finer blade or higher
speed. If the blade overheats or clogs, it may indicate you need a coarser blade. Replace
blades when they become dull. Dull blades will produce poor
results and may overheat the saw.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWE30030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWE30030 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWE30030

Powerplus POWE30030 User Manual - German - 9 pages

Powerplus POWE30030 User Manual - Dutch - 8 pages

Powerplus POWE30030 User Manual - French - 9 pages

Powerplus POWE30030 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info