676328

Powerplus POWE00015 Manual

6
Zoom out
Zoom in
Previous page
1/9
Next page
POWE00015 EN
Copyright © 2017 VARO P a g e | 6 www.varo.com
▪ Avoid charging your battery in freezing conditions as charging power will not be sufficient.
Note: if the tool will not be used for long periods of time, charge the battery
every 3-6 months.
Note: to prevent damage to the battery, when charge runs out, charge the
battery to reach full or no less than half charge before storage.
8.2 LED light (Fig. 2)
There is one LED work-light (6) at the front of this screwdriver and they can light prior to motor
running if you press the switch lightly, which keep the work area to be lighted for checking
clearly at first, and it lights also during your operation.
WARNING: Do not stare directly at the light beam. Never aim the beam at
any person or an object other than the work piece.
Do not deliberately aim the beam at personnel and ensure that it is not
directed towards the eye of a person for longer than 0.25 s.
8.3 Driving and removing screws (Fig. 3)
Your tool is equipped with a switch trigger, select the chuck’s rotation direction by operate the
forward/reverse rotation lever (9).
The screwdriver is started and stopped by depressing and releasing the ON/OFF switch
trigger (5).
8.3.1 Switch lock
The switch trigger can be locked in the lock position.
This helps to reduce the possibility of accidental starting when not in use. To lock the switch
trigger, place the forward/reverse rotation lever (9) in the centre position.
8.3.2 Direction of rotation
Direction of rotation is controlled by the forward/reverse rotation lever (9) located above the
ON/OFF switch trigger (5).
Clockwise rotation:
To select forward rotation, release the ON/OFF switch trigger (5) and push the forward/reverse
rotation lever (9) to left side of the tool.
Anticlockwise rotation:
To select reverse rotation, push the forward/reverse rotation lever (9) to right side of the tool.
When the selector is in centre position, the switch trigger is locked and the machine cannot be
switched on.
WARNING: Never change the direction of rotation when the chuck is
rotating. Wait until it has stopped.
NOTE: The spindle is locked when the screwdriver is switch off, this means
that you can use the screwdriver to insert and remove screws even if the
battery is discharged.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWE00015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWE00015 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWE00015

Powerplus POWE00015 User Manual - German - 10 pages

Powerplus POWE00015 User Manual - Dutch - 9 pages

Powerplus POWE00015 User Manual - French - 9 pages

Powerplus POWE00015 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info