POWDPG7527 EN
Copyright © 2019 VARO P a g e | 9 www.varo.com
10.3 Start and stop
▪ Start up of the machine: press the switch to “I” (ON).
▪ Stopping the machine: press the switch to “O” (OFF).
10.4 How to hold the machine and guide it whilst working
Whilst working, always place yourself behind the machine and hold it firmly with both hands on
the handles.
10.5 Speed regulation
This machine has a speed regulator (8) with which you can control the speed of the blowing
air and that of the vacuum air. To regulate the speed turn the regulator “1” to “MAX” depending
on whether you want more or less speed.
10.6 Working with the blowing function
▪ Start the machine and aim the air flow towards the leaves and materials to be pushed.
▪ Push all the material towards one place which preferably should be a corner.
▪ Once all the material has been grouped for pick up, turn the machine off, switch to vacuum
function, start the machine again and begins to suck the materials.
10.7 Working with the vacuum
▪ Start the vacuum and vacuum the material.
▪ When you feel the catcher is full, stop the machine, disconnect the catcher and empty it.
▪ Once the catcher is empty, connect again before starting to work again.
11 CLEANING AND MAINTENANCE
11.1 Cleaning
▪ Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪ Regularly clean the machine housing with a soft cloth, preferably after each use.
▪ Keep the ventilation slots free from dust and dirt.
▪ If the dirt does not come off use a soft cloth moistened with soapy water.
▪ Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
11.2 Maintenance
▪ Our machines have been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper machine care
and regular cleaning.
▪ In order to maintain battery capacity, we recommend the battery to be completely
discharged every one month and fully recharged again . Store in a dry and frost-free
place, the ambient temperature should not exceed 40°C.
12 TECHNICAL DETAILS
