645097
6
Zoom out
Zoom in
Previous page
1/8
Next page
POWC3010 EN
Copyright © 2016 VARO P a g e | 6 www.varo.com
7.4 Mounting grinding discs and roughing discs
Fig. 4 and 5 show how to mount the flange nut (9) when using thick (4 8 mm) and thin (2,5
4 mm) discs.
8 OPERATION
8.1 Special attention when starting the machine
Clamp the workpiece and make sure that the workpiece cannot slide from under the
machine during the cutting activities.
When working with the machine, always hold it firmly with both hands and provide for a
secure stance.
Always direct the cable to the rear away from the machine.
Insert the mains plug only when the machine is switched off.
Apply the machine to the workpiece only when switched on
Never use the machine for grinding magnesium workpieces.
8.2 Switching On
Press the end of the ON/OFF switch down then slide it forwards until it locks.
The machine will start.
8.3 Switching Off
Unlock the ON/OFF switch, the machine will be switched OFF. The disc will gradually
slow down and eventually stop after a few seconds.
Do not put the machine down when the disc is still turning.
In case of interruption of the mains supply the on/off switch of the tool
needs to be released and reactuated.
9 USE
Hold the machine firmly and move it against the workpiece. Move the grinding disc evenly
across the workpiece.
Move the machine during roughing under an angle of 30º - 40º across the workpiece (fig.
6).
Never use grinding discs for roughing!
Inspect the grinding disc regularly. Worn discs have a negative effect on efficiency of the
machine. Replace the grinding disc on time.
Do not put the machine down when the motor is still running. Do not place the machine on
a dusty surface. Dust particles may enter the mechanism.
Always switch off the machine first before removing the plug from the wall socket.
Never use the spindle lock to stop the motor.
10 CLEANING & MAINTENANCE
10.1 Service
Only qualified specialist personnel and original replacement parts should be used for
repairs. This will ensure that your device remains safe.
Damaged switches must be replaced by our after-sales service department.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWC3010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWC3010 in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWC3010

Powerplus POWC3010 User Manual - German - 9 pages

Powerplus POWC3010 User Manual - Dutch - 8 pages

Powerplus POWC3010 User Manual - French - 8 pages

Powerplus POWC3010 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info