645075
5
Zoom out
Zoom in
Previous page
1/7
Next page
POWC2010 EN
Copyright © 2017 VARO P a g e | 5 www.varo.com
Saw blades must be kept sharp and in good condition. Replace partially fractured and
broken saw blades immediately.
Work calmly and evenly with the jig saw. You will thus avoid accidents and the saw blades
and the jig saw will last longer.
7 OPERATING INSTRUCTIONS
7.1 Changing the saw blade (Fig 1)
Releasing the saw blade.
Turn the screws anticlockwise (A)
Insert the saw blade in the ram up to the stop and tighten the two screws of the retention clip.
Important ! : Make sure the saw blade sits properly in the slot of the roller and ram.
7.2 Switching ON/OFF (Fig 2)
Switching ON : Press the On/Off switch.
Continuous operation. Lock the On/Off switch with the locking button.
Switching Off : Press the On/Off switch and release.
A: locking button
B: ON/Off switch
7.3 Adjusting the base (fig 3)
Loosen the 2 screws to set the base to an angle up to 45° on the right or left side and re-
tighten the screws.
7.4 Dust extraction
The jigsaw is equipped with a dust extractor socket. You can connect your vacuum cleaner to
the socket at the rear of the jigsaw. If you require a special adapter, please contact the
manufacturer of your vacuum cleaner.
8 TECHNICAL DATA
Nominal voltage
230-240 V - 50 Hz
Power consumption
350W
Cutting rate
3000 min
-1
Cutting depth in wood
55 mm
Cutting depth in steel
6 mm
Cutting depth in plastic
20 mm
Mitre cuts
Up to 45° (left and right)
Connection type
Universal
9 NOISE
Noise emission values measured according to relevant standard. (K=3)
88 dB(A)
99 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
7.9m/s²
K = 1.5 m/s²
10 WARRANTY
This product is warranted as provided by law for a 24 -month period effective from the
date of purchase by the first user.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWC2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWC2010 in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWC2010

Powerplus POWC2010 User Manual - German - 7 pages

Powerplus POWC2010 User Manual - Dutch - 7 pages

Powerplus POWC2010 User Manual - French - 8 pages

Powerplus POWC2010 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info