795365
3
Zoom out
Zoom in
Previous page
1/8
Next page
POWAIR0021 EN
Copyright © 2016 VARO P a g e | 3 www.varo.com
WARNING! Check correct air pressure is maintained and not exceeded. We
recommend 90psi.
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before
each use and ensure that all connections are secure.
Only use impact sockets/Chisels /Grinding Stones which are specifically designed for
use with an impact wrench./Ratchet Wrench /Air Hammer.
WARNING Inspect Sockets/Grinding Stones/Chisels daily for excessive wear or
cracks.
Caution! Impact wrench /Ratchet wrench sockets and accessories must be used with
this tool. Do not use hand sockets and accessories.
Caution! The spring retainer holds chisel in place, it must be secure before the chisel
can operate properly.
Caution! Die grinder accessories rated for 10,000 RPM or more
Wear approved safety eye/face shield, ear defenders, and hand protection.
WARNING! Due to the possible presence of asbestos dust from brake linings, when
working around vehicle brake systems we recommend you wear suitable respiratory
protection.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-
slip shoes.
Keep children and non essential persons away from the working area.
DO NOT use the wrench for a task it is not designed to perform.
DO NOT use wrench if damaged or thought to be faulty.
DO NOT use wrench unless you have been instructed in its use by a qualified
person.
DO NOT carry the wrench by the air hose at yourself or others.
DO NOT direct air from the air hose at yourself or others.
When not in use disconnect from air supply and store in a safe, dry, childproof
location.
4 AIR SUPPLY
Ensure air valve (or trigger) is in the off position before connecting to the air supply.
You will require an air pressure of 90psi, and an air flow according to specification.
WARNING! Ensure the air supply is clean and does not exceed 90psi while operating
the tool. Too high an air pressure and unclean air will shorten the product life due to
excessive wear, and may be dangerous causing damage or personal injury.
Drain the air tank daily. Water in the air line will damage the tool.
Clean air inlet filter weekly.
Line pressure should be increased to compensate for unusually long air hoses (over
8 meters). The minimum hose diameter should be 3/8 I.D. and fittings must have the
same inside dimensions.
Keep hose away from heat, oil and sharp edges. Check hose for wear, and make
certain that all connections are secure.
5 LUBRICATION
An automatic in-line filter-regulator-lubricator is recommended (Fig. 1) as it increases tool
life and keeps the tool in sustained operation. The in-line lubricator should be regularly
checked and filled with air tool oil.
Proper adjustment of the in-line lubricator is performed by placing a sheet of paper next to
the exhaust ports and holding the throttle open approximately 30 seconds. The lubricator
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWAIR0021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWAIR0021 in the language / languages: English as an attachment in your email.

The manual is 0.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWAIR0021

Powerplus POWAIR0021 User Manual - German - 9 pages

Powerplus POWAIR0021 User Manual - Dutch - 9 pages

Powerplus POWAIR0021 User Manual - French - 9 pages

Powerplus POWAIR0021 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info