481008
11
Zoom out
Zoom in
Previous page
1/13
Next page
POW8041 EN
Copyright © 2014 VARO P a g e | 11 www.varo.com
Important! The cutting bevel of the teeth, i.e. the direction of rotation of the
saw Wade, has to conform with the direction of the arrow marked on the
housing.
Re-mount the table insert (3), the splitter (30) and the blade guard (17) and secure in
place.
When fastening the splitter (30} make sure that the distance between the teeth of the
blade and the splitter is a minimum 2 mm and a maximum 5 mm (Fig. 07).
Before using the saw again, check that the safety devices are in good working order.
9 TECHNICAL DATA
Asynchronous motor
230 V - 50 Hz
Power rating
1200 W
Operating mode
S1
idle speed
4500 min
-1
Carbide saw blade
Ø 210 x Ø 30 x 2.5 mm
Number of teeth
24
Connector for dust extractor
Ø35 mm
Standing area
400 x 285
Saw table
380 x 270 mm
Cutting height
0 33 mm
Parallel stop swinging range
-30° to +30°
Tilting range
-45° / 0° / +45°
Mitre cuts
0° to 45° to the left
Saw bed support
390 x 140 mm
Sawing width at 90°
120 x 55 mm
Sawing width at 45°
65 x 55 mm
Sawing width at 2 x 45°(double mitre cuts)
40 x 23 mm
Sawing width at 45°
120 x 35 mm
10 NOISE
Noise emission values measured according to relevant standard. (K=3)
99 dB(A)
112 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
11 WARRANTY
This product is warranted as provided by law for a 24 -month period effective from the
date of purchase by the first user.
This warranty covers all material or production flaws excluding: batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW8041 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW8041 in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW8041

Powerplus POW8041 User Manual - German - 14 pages

Powerplus POW8041 User Manual - Dutch - 13 pages

Powerplus POW8041 User Manual - French - 14 pages

Powerplus POW8041 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info