582081
5
Zoom out
Zoom in
Previous page
1/13
Next page
POW60478 EN
Copyright © 2015 VARO P a g e | 5 www.varo.com
DO NOT ADD, REMOVE OR ALTER ANY COMPONENTS OF THIS PRODUCT. Doing
so could cause personal injury and/or damage the unit, and void the manufacturer’s
warranty.
DO NOT operate your unit near or around inflammable liquids or gases whether in or out
of doors. An explosion and/or fire may result.
DO NOT USE ANY OTHER CUTTING ATTACHMENT. Only use our replacement parts
and accessories, which are designed specifically to enhance the performance and
maximize the safe operation of our products. Failure to do so may cause poor
performance and possible injury. Use only the stringhead supplied with this product. Do
not use any other cutting attachment. Use of such attachments will void your factory
warranty and may result in serious bodily injury.
6 PETROL SAFETY WARNINGS
WARNING: Use extra care when handling fuels. They are inflammable and
the vapours are potentially explosive. The following points must be
observed.
Use only an approved container.
Never remove the fuel cap or add fuel when the engine is running. Allow engine exhaust
components to cool before refueling.
Do not smoke.
Never refuel the machine indoors.
Never store the machine or fuel containers in places where there is a naked flame, such
as a water heater.
If fuel is spilt, do not attempt to start the power source before moving the machine away
from the spillage area.
Always replace and securely tighten the fuel cap after refueling.
Whenever the tank is drained, this should be done outdoors.
7 ASSEMBLY
7.1 Two-handed fork handle
Loosen the handle screws and place the handle into the holder, as depicted in the main
figure.
Re-tighten the screws and verify they are properly tightened.
Warning: Make sure the grip is properly mounted and check it regularly.
Parts, which are not properly mounted, represent a risk of injury.
7.2 Mounting of the protective cover (Fig. 1)
Assemble protective cover as fig. 1 illustrates, note that the bolts should be tightened.
Fig. 1: 4pcs 5x20mm bolts (A), 4pcs 5mm washers (B), spacer plate (C).
7.3 Trimmer mounting (Fig. 2)
Fit the upper plate (D) and adapter housing © to the output axle.
Turn the blade axle until one of the holes in the upper plate aligns with the hole (F) in the
gear housing (E).
Insert a locking pin in the hole (F) so that the axle is locked.
Place the low plate (B) and nylon trimmer head (A) on the output shaft.
Screw on the trimmer head (A) in the direction of rotation.
7.4 Cutting blade mounting (Fig. 3)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW60478 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW60478 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW60478

Powerplus POW60478 User Manual - German - 14 pages

Powerplus POW60478 User Manual - Dutch - 15 pages

Powerplus POW60478 User Manual - French - 15 pages

Powerplus POW60478 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info