480986
5
Zoom out
Zoom in
Previous page
1/9
Next page
POW462 EN
Copyright © 2015 VARO P a g e | 5 www.varo.com
Only the provided/included welding cables must be used (Ø10mm² section rubber cable)
Maintenance must be done on a regular bases.
While working, keep the welder free from all debris, do not put it against a wall, so
ventilation is guaranteed at all times.
Pull socket from mains before moving the welder.
Check condition of welding cables, electrode clamp, earth clamp regularly. Damaged
insulation can cause harm and can diminish quality of welding.
Bow welding produces sparks, melted metal particles and smoke. So be very cautious
and remove all combustible fluids/materials from your working area.
Make sure air supply is sufficient.
Never weld bottles, barrels or tubes that contained inflammable liquids or gasses. Avoid
every contact with the welding current circuit: the no-load voltage that may occur between
the electrode clamp and the earth clamp may be dangerous.
Never store or use the welder in a moist environment or in the rain.
Protect your eyes with appropriate safety goggles (DIN degree 9-10) that you put in the
enclosed safety cap. Wear gloves and dry protective clothing, free of oil and grease, to
protect your skin from UV light.
CAUTION ! De UV light from the welding bow can damage your eyes or burn
your skin.
Bow welding produces sparks en drops of melted metal. The welded surface remains hot
for quite a while.
Vapors may occur that can be harmful to your health. Electrical shock can be lethal.
Don’t come any closer than a radius of 15m from the light bow without protection.
Protect yourself and the people around you from the harmful affects of the light bow.
Caution: depending on the main circuit, it may occur that other users may experience
disturbances. In case of doubt please contact your power company.
6.1 Precautions.
Leave adaptations to the main circuit, sockets, cables etc to qualified personnel, in
particular extension cables.
When accident occurs: cut welder immediately from mains.
If electrical contact voltages occur, shut the welder down and contact qualified person to
check welder.
Welding current: always make sure electrical contacts are impeccable.
Always ware insulating gloves on both hands for protection against: electrical shock, UV
radiation, melted metal, sparks etc.
Ware solid, insulating (also in moist environment) shoes. Falling drops of melted metal
can result in severe burnings.
Ware appropriate clothing: no synthetic fibers!
Never look into the welding bow without protection! (Only with appropriate safety goggles)
UV radiation can cause severe damage to your eyes and skin (blinding, burning) that only
appear after several hours (ref sunburn)
All above is also valid for people in your surrounding.
Make sure air supply is sufficient, especially in small rooms.
Never weld bottles, barrels or tubes that contained inflammable liquids or gasses, even
after a long time residues can cause explosions.
In an environment with fire / explosion caution, more strict prescriptions are valid.
Welds that have to bear heavy tension or meet specific safety expectations must be made
by qualified welders.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW462 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW462 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW462

Powerplus POW462 User Manual - German - 11 pages

Powerplus POW462 User Manual - Dutch - 10 pages

Powerplus POW462 User Manual - French - 11 pages

Powerplus POW462 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info