480993
5
Zoom out
Zoom in
Previous page
1/8
Next page
POW4012 EN
Copyright © 2014 VARO P a g e | 5 www.varo.com
Always keep the holes in the base plate clean from dust.
Always connect a vacuum cleaner to the attached adaptor during your work.
Take special care when sanding lead based paint:
All persons entering the work area must wear a mask specially designed for protection
against lead paint dust and fumes.
Children and pregnant women must not enter the work area.
Do not eat, drink or smoke in the work area.
Do not leave the tool running. Operate the tool only when hand-held.
Ventilate your work area adequately when you perform sanding operations.
Be sure that there are no cracks or breakage on the pad before use. Cracks or breakage
may cause a personal injury.
7 OPERATION
Do not sand plaster surfaces, (WARNING: In this case your guarantee
becomes void) this may clog the motor (brushes, ball bearings, ..).
7.1 Switching on/off
To switch on the machine press the on/off switch.
To switch off the machine, release the on/off switch.
To switch the machine to continuous mode, you keep the on/off switch fully pressed and
simultaneously press the loch button. And subsequently release the on/off switch.
To switch off continuous mode, press the on/off switch again.
7.2 Attaching the sandpaper
Open the paper clamps.
Take sanding paper of the required grain size and place it on the sanding pad.
Make sure that the perforation in the paper corresponds with those on the sanding pad.
Fold tha sanding paper at both ends around the edges of the sanding pad.
Close the paper clamps one by one.
Make sure that the ends of the sanding paper are clamped.
The sanding paper must be fitted firmly on the sanding pad and should not come loose.
7.3 Collecting the dust
For a better dust extraction of the working surface, your sanding machine can be
connected to the ordinary vacuum cleaner for house-use.
Slide the suction mouth of a vacuum cleaner onto the connection.
The vacuum-cleaner connecting piece is supplied with the appliance.
8 TECHNICAL DATA
Power rating
135W
Mains voltage
230-240V
Frequency
50Hz
Sanding surface
90 X 187 mm
No load speed
12000 min-1
Weight
1.19kg
Safety class
II
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW4012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW4012 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW4012

Powerplus POW4012 User Manual - German - 8 pages

Powerplus POW4012 User Manual - Dutch - 7 pages

Powerplus POW4012 User Manual - French - 8 pages

Powerplus POW4012 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info