390240
5
Zoom out
Zoom in
Previous page
1/8
Next page
POWXQ5406 EN
Copyright © 2015 VARO P a g e | 5 www.varo.com
Do not eat, drink or smoke in the work area.
Whenever possible, use a vacuum extractor for dust collection.
Remove dust and other waste matter in an environmentally safe way.
Always secure the work piece by clamps or else to avoid slipping away.
Do not leave the tool running. Operate the tool only when handheld.
Ventilate your work area adequately when you perform sanding operations.
Be sure that there are no cracks or breakage in the belt before use. Cracks or breakage
may cause a personal injury.
Do not force the sander. Let the tool work at a reasonable speed. Overloading will occur if
too much pressure is applied and the motor slows resulting in inefficient sanding and may
damage the sander motor.
Do not touch the moving sanding belt.
Fully unwind extension leads to avoid potential overheating
Never use the machine for sanding magnesium workpieces.
7 ASSEMBLY
ATTENTION! Disconnect the power plug before carrying out any
adjustments or maintenance.
7.1 Attaching the dust bag (2)
Use always the supplied dust bag in importance of your health when you work with the
machine
7.2 Mounting a sanding belt
Pull the clamping lever (8) out and turn it as far as it will go.
Take a sanding belt of the required grain size and place it on the rollers. Make sure that
the arrow on the inside of the sanding belt points in the same direction as the arrow on the
machine.
Make sure that the sanding belt is straight and centred on the rollers.
Push the clamping lever back.
Switch the machine on to let the sanding belt run. With the machine switched on, turn the
belt centring knob (7) until the sanding belt keeps running straight.
The sanding belt must be fitted firmly on the sanding pad and should not
come loose.
8 OPERATION
Do not sand plaster surfaces, (WARNING: In this case your guarantee
becomes void) this may clog the motor (brushes, ball bearings, ..).
8.1 Switching On/off
To switch the tool on, press the on/off switch (5).
To switch the tool off, release the on/off switch.
8.2 Continuous operation / ON/OFF lock button
To switch on :
Hold the on/off switch pressed (5)
Press the lock button (3)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus pow xq 5406 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus pow xq 5406 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus pow xq 5406

Powerplus pow xq 5406 User Manual - German - 9 pages

Powerplus pow xq 5406 User Manual - Dutch - 9 pages

Powerplus pow xq 5406 User Manual - French - 9 pages

Powerplus pow xq 5406 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info