388781
6
Zoom out
Zoom in
Previous page
1/9
Next page
POW3054 EN
Copyright © 2011 VARO NV Page | 6 www.varo.com
8.4 Dust collection device (Fig. 6)
Before carrying out hammer-drilling work vertically overhead pull dust collecting device over
the drill bit.
8.5 Drill Stop (Fig. 7)
You can deactivate the drilling action of the hammer drill when using it for chiselling work
§ To do so, turn the drill stop (7) so that the mark (c) coincides with the arrow (a) on the
machine case.
§ To reactivate the drilling action, the drill stop (7) has to be reset so that the mark (b)
coincides with the arrow (a).
Important! When hammer drilling you will require a low pressure. Too much
pressure will place unnecessary load on the motor. Check the drill bits
regularly. Re-sharpen or replace blunt drill bits.
9 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
9.1 Cleaning
§ Keep the ventilation slots of the machine clean to prevent overheating of the engine.
§ Regularly clean the machine housing with a soft cloth, preferably after each use.
§ Keep the ventilation slots free from dust and dirt.
§ If the dirt does not come off use a soft cloth moistened with soapy water.
§ At the end of your work, to prevent dust deposits, you should use compressed air (max 3
bar) to clean out the ventilation slots .
§ Check the carbon brushes regularly (dirty or worn carbon brushes result in excessive
sparking and speed faults).
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10 TECHNICAL DATA
Rated voltage Rated frequency 230 V- 50 Hz
Rated power 850 Watt
Rotation 800 min
-
1
Impact rate 3200 min
-
1
Drilling performance (max): concrete/stone 26 mm
Cable length 2 m
Chuck type 13 mm key chuck EXTRA
Weight: 4.7 kg
Protection class II
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus pow 3054 p at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus pow 3054 p in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus pow 3054 p

Powerplus pow 3054 p User Manual - German - 9 pages

Powerplus pow 3054 p User Manual - Dutch - 9 pages

Powerplus pow 3054 p User Manual - French - 9 pages

Powerplus pow 3054 p Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info