766797

Power Dynamics 952.570 PD VOL50 Manual

3
Zoom out
Zoom in
Previous page
1/8
Next page
MOUNTING THE VOLUME CONTROL
The volume control is designed to be mounted in a standard
electrical wall box. Select a location that is within reach of the
speaker wires and easy to reach for using the volume control.
Warning: You must mount the volume control in a standard
electrical box, do not mount it directly on a wall.
CONNECTIONS
1. Run 4-Conductor speaker cable from the amplifier (positive and
negative for both the left and right channel) to the volume control
marked 1 and 2. Similarly, run 2-conductor speaker cable from
each of the first pair of speakers to the volume control. Label
the cables for future reference.
2. Measure the depth of the volume control to make sure your
Volume Control will fit in the box.
3. Connect the speaker cable to the volume control:
a. Strip 6mm of insulation from the end of each cable.
b. Tightly twist the wires in each cable until there are no frayed
ends.
c. Insert the 4-conductor speaker cable from the amplifier into
the input terminals.
d. Insert the two 2-conductor speaker cables from the first pair of speakers into the output terminals.
4. Connect additional speakers in parallel.
5. Make sure that all connections between your amplifier and the volume control, and between the volume
control (3) and each speaker, are in “phase”, that is (+) to (+) and (-) to (-).
6. Turn the volume knob to the “off” position (all the way down.)
7. Screw box into place.
8. Put on faceplate and screw in place using the screws.
Caution: This volume control is limited to a maximum of 50 watts maximum per channel.
SPECIFICATIONS
Power : 50 Watts / Channel
Attenuation : 1st position (slider at bottom): Full off
2
nd and 3rd position: attenuate 6 +/- 1 dB per step
4
th through 9th position: attenuate 3 +/- 1 dB per step
10
th position: Full on
Weight : 225 gram
Dimension : 70 x 112 x 83mm
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Power Dynamics 952.570 PD VOL50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Power Dynamics 952.570 PD VOL50 in the language / languages: English, French as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info