Manual Polti Vaporetto Lecoaspira 910 (page 5 of 16) (English)

481643

Zoom out

Zoom in

1/16

ENGLISH

Plug the cable into a suitable power outlet (240V - 50 Hz).

• Press the main switch (1) below the control panel. The first

level of suction indicators (10) will start to flash.

• Press the boiler ON switch (2). The boiler ON lamp (4) will

light up. The boiler level probe will automatically activate

a pump for delivering water from the self-filling tank to fill

the boiler.

• Wait for the pressure indicator lamp (6) to light up. When

it does the Vaporetto Lecoaspira will be ready to generate

steam.

• Open the flap of the built-in socket (24); fit the one-piece

plug (B2) into place by pressing the push-button (B3)

(Figure 6).

• To start suction it is possible to use either the ON push-button (8) on the control panel

or the suction push-button (A4) on the handle (A2).

Note: The handle (A2) has a safety button (A3) that prevents accidental activation of

the delivery of steam by children or persons who are unaware of how the

appliance works. If the appliance is left temporarily unattended while it is in an

activated condition, please remember to place the safety button (A3) in the

locked position. To resume delivery, return the button to its initial position.

•

From the control panel:

Press the ON push-button (8) and keep it pressed for a few

seconds. The suction fan will start to run at the minimum speed and the first stage of

the indicator lamp set (10) will stop flashing and remain steadily lit. For correct use of

the suction function read the section "Suction/OFF control".

•

From the handle:

press the push-button (A4) on the handle (A2). The suction function

will start up at the minimum speed and the first stage of the indicator lamp set (10) will

stop flashing and remain steadily lit. For correct use of the suction function read the

section "Suction/OFF control".

• You can supply steam by pressing the steam push-button (A5) on the handle. At the same

time you can also control suction by pressing the suction push-button (A4).

• If you wish to use the suction function only, press the main switch (1) located below the

control panel. The first level of the suction indicators (10) will start to flash.

• Open the flap of the built-in socket (24); fit the one-piece plug (B2) into place by pressing

the push-button (B3) (Figure 6).

• You may activate the suction function either by using the ON push-button (8) on the

control panel or by means of the suction push-button (A4) located on the handle (A2).

Fig. 6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporetto Lecoaspira 910 in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporetto Lecoaspira 910

Polti Vaporetto Lecoaspira 910 User Manual - Dutch - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polti Vaporetto Lecoaspira 910 Manual

Product: