Manual Polti Vaporetto Lecoaspira 710 (page 13 of 15) (English)

481646

Zoom out

Zoom in

1/15

the arrow so that the two pieces fit onto each

other and then hook them together. To un-

hook the parquet accessory from the joker

brush pull the two levers on the sides of the

fitting outwards and then lift the brush off

(Fig. 13).

((

))

• Connect the iron to the monobloc plug

(B2) proceeding as shown in the “Opera-

tion” paragraph.

Check the manufacturer’s label on the gar-

ment, and interpret the symbol on the label

as follows:

• For STEAM ironing, set the iron tempera-

ture to its maximum travel on the “COT-

TON - LINEN” steam position by turning

the knob (Y).

NB Set at its maximum, do NOT set

against the picture of iron on the knob

(Y).

Most fabric types, other than delicates can

be STEAM-ironed at this temperature,

please consult the garment label. If you

want to DRY iron, set the knob (Y) to the

required temperature for the fabric as,

shown on the dial.

Nb fabric indications on dial are for

DRY ironing, for STEAM ironing set at

maximum travel as explained above.

• Wait for a few minutes until the Iron heat-

ing” indicator light (X1) goes out, to show

that the soleplate of the iron has reached

the required temperature.

• Press the steam request button (X) on the

iron to release bursts of steam from the

holes on the soleplate. Release the button

and the steam will stop. When you first

start to use the iron, a few drops of water

may come out of the sole-plate mixed with

the steam due to imperfect heat stabilisa-

tion. It is therefore advisable to direct the

first jet of steam onto a rag.

• In order to obtain a continuous jet of steam

move the sliding switch (W1). The steam

will continue to come out even when the

steam request button (X) is released. To

stop the flow of steam push the sliding

switch backwards (W1).

RECOMMENDED TECHNIQUE for STEAM

ironing with Polti iron is APPLY steam (but-

ton X) on the upstroke, then release button

(X) (so no steam) for the backstroke, so re-

closing the fibres, preventing oversteaming

and wetness.

DRY IRONING

• FOR DRY IRONING ONLY (NOT steam

ironing), press the main switch (1) and ad-

just the temperature of the iron by turning

dial (Y) to the temperature required for the

fabric (as shown on the dial).

NOTE: using the iron, it is advisable to ad-

just the steam jet at a medium range, or to

do some testing in order to find the jet which

is more suitable to the fabric to be ironed.

IMPORTANT NOTE

• Do not leave the iron unattended whilst

connected to the mains.

• Iron only on heat resistant surfaces and on

surfaces that allow the steam to escape

e.g. mesh ironing boards.

• In case of accidental fall of the appliance it

is necessary to have it checked by an au-

thorized service center as the internal

Steam ironing allowed--set the dial to its

MAXIMUM travel at the end of the 3

dots symbol on your Polti iron

Steam ironing allowed--set the dial to its

MAXIMUM travel at the end of the

THREE (nb THREE, not two) dots sym-

bol on your Polti iron

DRYIRON only, with iron dial set at one

dot. N.B. NEVER CALL FOR STEAM

BY PRESSING STEAM REQUEST

BUTTON when DRY ironing. See spe-

cial instructions for DRY ironing in the

instruction book.

DO NOT IRON. Neither steam nor dry

ironing allowed.

LECOASPIRA710 - 710 KIT

Lecoaspira 710-710kit - M0S07340 1M05.qxp 22/06/2006 12.23 Pagina 61

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporetto Lecoaspira 710 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporetto Lecoaspira 710

Polti Vaporetto Lecoaspira 710 User Manual - Italian - 15 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polti Vaporetto Lecoaspira 710 Manual

Product: