ENGLISH
HOW TO USE THE NON-DRIP BOTTLE (14)
Unscrew the cap and fill the bottle with water, put the cap back on the neck of the bottle
by inserting first the small tube into the body and then screwing tight.
Put the spout of the bottle close to the filling duct and then insert it. When the level of water
in the boiler reaches the tip of the spout, the water flow stops automatically. You can then
move the bottle back to a vertical position.
Note:
for products equipped with water level display
: fill until the water reaches the max.
level indicated).
120° STEAM NOZZLE (16)
The 120° nozzle (which can be connected directly to the gun or together with the exten-
sion tubes) allows you to concentrate a powerful jet of steam to otherwise inaccessible loca-
tions, such as radiators, door posts, sills and shutters, as well as for sterilising toilet bowls.
3 COLOURED SMALL BRUSHES FOR 120° NOZZLE - NYLON BRISTLES (17)
For maximum hygiene, a different colour for every surface (three small brushes, three dif-
ferent colours).
WINDOW SQUEEGEE TOOL (18,19,20)
The Window Squeegee Tool allows you to clean effectively and rapidly all glass surfaces
without using detergents. Your glass wilI remain cleaner longer thanks to the absence of
layers of film normally left behind by chemical cleaning products on which new dust and
grease can attach itself.
Cleaning glass is done in two stages:
- Spraying the steam onto the surface to be cleaned to loosen the dirt (not touching with
blade).
- Pulling the blade straight down the window surface from top to bottom without apply-
ing the steam, to take away the dirt.
- To clean especially large glass surfaces, attach the Window Squeegee Tool to the exten-
sion tubes.
LONG STEAM LANCE (21)
This accessory allows you to reach the most inaccessible places. Ideal for cleaning large
radiators or shutters etc.
TRIANGULAR BRUSH (22)
A new accessory whose shape allows access into the most difficult corners.
CC
CC
AA
AA
RR
RR
EE
EE
OO
OO
FF
FF
YY
YY
OO
OO
UU
UU
RR
RR
VV
VV
AA
AA
PP
PP
OO
OO
RR
RR
EE
EE
TT
TT
TT
TT
OO
OO
• Before attempting any maintenance operation, be sure to always disconnect the appli-
ance from the mains
• To maintain efficient performance, we recommend emptying and flushing out the gen-
erator with tap water at least once a month; this operation flushes away the scale
deposits inside the generator. Never empty the Vaporetto when the water in the gen-
erator is still hot.
• Apply a little Vaseline to the cap thread every 4-5 months to prevent sticking.
• We recommend that the bristles of the brushes are allowed to cool down in their nor-
mal position after use, so as to avoid any mis-shaping.
