481661
9
Zoom out
Zoom in
Previous page
1/10
Next page
VAPORETTO 2600 - VAPORETTO 2600 KIT
40
E
E
N
N
G
G
L
L
I
I
S
S
H
H
of the steam could alter the waxed appea-
rance, the shine or the colour of the surfaces
cleaned. We therefore recommend you to
apply the steam on such surfaces only for
brief periods or to clean these surfaces using
a cloth first held in the steam.
Please pay particular attention while cleaning
brick floors: a too long application of steam
could damage wax, brightness or colour of
these surfaces.
For delicate surfaces (e.g. synthetic mate-
rials, lacquered surfaces etc.) we recom-
mend to always cover the small brush with at
least two cloths to reduce the intensity of the
steam, and (on machines with steam varia-
tion control) with the steam set at low level.
Always test first on a non-visible area, allow
to dry thoroughly, and if successful, be sure
to use exactly the same tool, technique,
steam level and steam jet distance.
If cleaning glass surfaces in particularly low
temperatures preheat the glass using the
hand gun from about 50 centimetres di-
stance from the surface to be cleaned.
For care of your plants vaporise at a mini-
mum distance of 50 centimetres.
STEAM GUN (2)
The steam gun can be used directly on all
spots requiring a stronger, closer treatment
without connecting the brushes. The more resi-
stant the stain, the closer you should hold the
gun, the steam pressure and temperature
being higher at the source. Always wipe with a
dry cloth (or a slightly abrasive sponge if the
spot is a difficult one to remove) after using the
gun. Steam gun is particularly efficient at:
breaking down rug and carpet stains before
they are treated with the large brush;
cleaning stainless steel surfaces, panes, mir-
rors, enamelled surfaces;
cleaning hard-to-reach corners, such as
stairs, window sills, door posts;
cleaning cooking top knobs, taps bases
cleaning window shutters, heaters, car inte-
riors;
spraying plants (from a distance);
removing odours and creases from clothes.
To reach higher points, the steam gun can be
connected to one or both extension tubes.
LARGE BRUSH (8)
To clean floors, put a clean, dry kitchen cloth
under the brush and swing back and forth
without applying any pressure. Use the other
side of the cloth when the first one is impregna-
ted with dirt. Use the brush directly without the
cloth on particularly dirty or incrusted areas and
in spaces between the tiles: swing the brush si-
deways to detach the dirt. Highly obstinate
stains may require a steam gun treatment
before the brush and cloth are used (an old
bath towel is an ideal cloth) . The same proce-
dures apply to ceilings and vertical surfaces,
like wallpaper. The cloth can easily be fastened
around the brush and held in place by the 4
clips (9) on the brush itself. Smooth cotton
cloths are suitable for the treatment of glass
surfaces: fasten the cloth around the brush
then pass it over the window pane (or mirror) to
remove the greasy film. Finally, spray the sur-
face with the steam gun and wipe dry with a
clean cloth. In cold weather, window panes will
require pre-heating with the steam gun (from a
distance of 50 cm), prior to the actual cleaning
with the the brush. VAPORETTO is ideal for
both syntetic and wool rugs as well as for all ty-
pes of carpets. Its use ensures total hygiene,
revives colours and restores the original bril-
liance of the pile. Drying occurs practically at
once. Fold a cotton cloth over 2 or 3 times (ac-
cording to the length and resistance of the pile)
and fasten it onto the brush. Move the brush ra-
pidly in all directions without applying any pres-
sure. You should avoid lingering in the same
place, as this may soak the area. Particularly
dirty rugs may need several treatments. Obsti-
nate stains may require the use of the steam
gun (at a distance of 5-10 cm) prior to treat-
ment.
SMALL BRUSH (12)
The small brush is used whenever the big
brush is too big or not practical to be used.
The small brush can be connected directly to
the steam gun or to the extension tubes. The
small brush can be used on:
furnishing fabrics (after testing on a small
hidden area)
car linings (not pile surfaces), car windows
(not in freezing temperatures)
VT 2600-2600 KIT M0S09378 1Q06:VT 2300 M0S05357 1L05 15/06/2010 12.15 Pagina 40
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti Vaporetto 2600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporetto 2600 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporetto 2600

Polti Vaporetto 2600 User Manual - German - 10 pages

Polti Vaporetto 2600 User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info