648754
8
Zoom out
Zoom in
Previous page
1/10
Next page
ENGLISH
Wait until the iron heating light (5) turns off.
This mode is recommended for:
NOTE:
After 10 minutes of use, since the boiler is not
connected, the appliance automatically goes
into stand-by. The indicator (8d) will start to
flash.
To re-activate the appliance, press the steam
request button (4) for at least 1 second.
STEAM IRONING
For a steam iron, the correct programme must
be set by turning the selection dial (8), to the
type of fabric to be ironed (Fig. 4).
Adjust the selection dial (8) to the WOOL posi-
tion, for the following types of fabric:
Adjust the selection dial (8) to the COTTON po-
sition, for the following types of fabric:
Adjust the selection dial (8) to the LINEN posi-
tion, for the following types of fabric:
After setting the desired programme, the
steam ready light (8i) flashes. (except if using
the SYNT SILK OFF programme, in which
case the boiler remains off).
Before starting to iron, wait for the steam pres-
sure indicator (8i) to stay on continuously and
the “Iron heating” indicator light (5) to go out.
Press the steam button (4) on the iron to
make steam come out of the holes on the so-
leplate. Releasing the button, the flow stops.
NOTE: during initial operation of the iron, a
few drops of water mixed with steam may
come out of the soleplate until the tempera-
ture stabilises. It is advisable to direct the first
jets of steam onto an old cloth until a uniform
jet of steam is obtained.
In order to have a continuous steam jet, move
the button (6) forwards. Steam will keep on
coming out, even releasing the steam request
button. To interrupt the outlet, move the button
(6) backwards (fig. 5).
NOTE:
The “Iron heating” indicator light (5) turns on
and off during use. This indicates that the
electrical resistor has started to work to keep
the temperature in the iron steady. This is a
normal occurrence, and it is therefore possi-
ble to continue ironing.
The symbol on the label means: do not
iron
Ironing instructions
given on the label
Type of fabric:
Wool
Fibres
SETTING
indicator 8h on
Ironing instructions
given on the label
Type of fabric:
Cotton
Denim
SETTING
indicator 8c on
Ironing instructions
given on the label
Type of fabric:
Linen
SETTING
indicator 8a on
Ironing instructions
given on the label
Type of
fabric:
Acetates
Acrylic
Velvet
Nylon
Silk
Viscose
Polyester
SETTING
indicator 8l on
17
VAPORELLA FOREVER 1800 ECO PROGRAM
VL FOREVER 1800 ECO PROGRAM - M0S10337 - 1T02:FEV 1000-950.qxd 01/03/2013 15.53 Pagina 17
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti Vaporella Forever 1800 Eco Program at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporella Forever 1800 Eco Program in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporella Forever 1800 Eco Program

Polti Vaporella Forever 1800 Eco Program User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info