648707
22
Zoom out
Zoom in
Previous page
1/26
Next page
ENGLISH
| 40 |
27. TROUBLESHOOTING - TIPS
PROBLEM CAUSE SOLUTION
UNICO does not turn on. No power. Check the cable, plug and socket.
The motor revs/has little suction Tubes or accessories blocked Turn the appliance off, unplug, remove any
blockages in the tubes and accessories.
UNICO has no/reduced suction Dirt collector full or not correctly
inserted.
Suction adjustment set at the minimum
level.
Dirt collector or vacuum tube not
correctly inserted.
Clogged filters.
Clogged suction tubes.
Empty the dirt collector and insert correctly.
Adjust suction using the cursor on the handle.
Correctly insert the dirt collector tank and/or check
that the flexible vacuum tube has been correctly
inserted.
Proceed with filter cleaning as described in chapter 18.
Clean the tubes, as described in Chapter 22.
Water collects under the appliance during
vacuuming of liquids and/or damp dirt.
Liquid in dirt collector has exceeded the
MAX level.
Foam in the dirt collector.
Empty the dirt collector.
Follow the cleaning instructions in Chapters 17 - 18
- 22.
UNICO does not dispense steam. Boiler switched off.
Boiler out of water.
Steam hose not inserted.
Steam lock activated.
The boiler is not yet pressurised.
Turn on the boiler button.
Add water to the tank as described in Chapter 15.
Connect the steam hose to the flexible vacuum
tube, locking the automatic buttons; connect the
steam hose to the appliance and the handle (as
described in Chapter 1 and shown on page 2).
Deactivate the steam lock on the handle.
Wait for the steam indicator light to stop flashing.
The universal brush selector does not work. The holder with cloth for steam cleaning
is mounted on the brush.
Remove the holder with cloth from the brush.
In preset-program mode, at the end of suction,
there was no time to finish drying.
Vacuuming too slowly over the surfaces. In preset-program mode, it is still possible to
activate suction by pressing the suction button.
During cleaning operations, lines or traces of
dirt remain.
The Multibrush is dirty. Clean the Multibrush by washing it under running
water and wait for it to dry completely before using
it again.
Non-uniform drying of the hard floor. The rubber inserts are worn. Replace the inserts, as described in Chapter 23.
UNICO MCV80-MCV85 - M0S11431 - 1Q09:UNICO 30/08/2016 16.17 Pagina 40
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti Unico MCV80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti Unico MCV80 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info