296041
10
Zoom out
Zoom in
Previous page
1/11
Next page
9
1200
English
Repeated spots or bar
pattern Cause Solution
Developer rollers inside the film door
need to be cleaned.
Open film door in indirect light (do not
remove film). While turning rollers,
clean them with a lint-free cloth damp-
ened with water.
Damaged picture Cause Solution
Picture was shaken back and forth or
bent shortly after it was ejected from
the camera.
Picture was left in the exit slot, and
camera was set down on a table or
other surface.
During first 60 seconds of development,
handle print gently; hold it only by its
wide white border, and do not wave or
bend it.
Remove print from exit slot as soon as it
ejects.
Subject too dark Cause Solution
Camera’s photocell measured the bright
window light, causing the subject to be
too dark.
Reposition subject away from the bright
background.
When a bright source of light (lamplight,
candlelight, etc.) is in the central part of
the scene and in front of the subject, the
camera’s photocell will measure the
bright light, causing the subject to be
too dark.
Move the source of light to one side of
your subject so it is not in the central
part of the scene.
1200si.fm Page 9 Monday, August 28, 2000 3:46 PM
Downloaded from www.Manualslib.com manuals search engine
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polaroid 1200 i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polaroid 1200 i in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info