464060
67
Zoom out
Zoom in
Previous page
1/70
Next page
A cardiac event may have altered your ECG waveform. In this case, consult your physician.
Check WearLink! is displayed and your cycling computer cannot find your heart rate signal?
Make sure the cycling computer is no further than 40 m/131 ft from the heart rate sensor.
Make sure the heart rate sensor strap has not loosened during exercise.
Make sure the textile electrodes in sports apparel fit snugly.
Make sure that the electrodes of the heart rate sensor / sports apparel are moistened.
Make sure the heart rate sensor / electrodes in the sports apparel are clean and undamaged.
If the heart rate measurement does not work with the sports apparel, try using a Soft strap. If your heart
rate is detected with the strap, the problem is most probably in the apparel. Please contact the apparel
retailer / manufacturer.
If you have done all of the above-mentioned actions, and the message still appears and heart rate
measurement does not work, the battery of your heart rate sensor may be empty. For further information,
see Care and Maintenance (page 61).
Your cycling computer refers to the heart rate sensor as WearLink.
New WearLink found. Teach new WearLink? is displayed?
If you have purchased a new heart rate sensor as an accessory, it will have to be introduced to the cycling
computer. For further information, see Using a New Heart Rate Sensor (page 54).
If the heart rate sensor you are using is included in the product set, and the text appears on the display,
the cycling computer may be detecting the signal of another heart rate sensor. In that case, make sure you
are wearing your own heart rate sensor, that the electrodes are moistened, and that the heart rate sensor
strap has not loosened. If the message still appears, the battery of your heart rate sensor is empty. For
further information, see Care and Maintenance (page 61).
...Check Speed! is displayed?
For further information, consult Speed Sensor W.I.N.D. user manual.
Check Power! is displayed?*
Check that the power sensor function is activated in the cycling computer. If so, the cyclist symbol should
be displayed on the computer. Make sure your power sensor is positioned correctly. The battery of your
power sensor may be empty. For further information, see power sensor user manual.
...Teach new sensor? is displayed?
If you have purchased a new Polar H3 heart rate sensor, Polar Cadence Sensor W.I.N.D.* or Polar LOOK
Kéo Power system* as an accessory, it will have to be introduced to the cycling computer. For further
information, see Using a New Accessory (page 55).
...the altitude keeps changing even if I am not moving?
The cycling computer converts measured air pressure into an altitude reading. This is why changes in the
weather may cause changes in altitude readings.
…the altitude readings are inaccurate?
Your altimeter may show faulty altitude if it is exposed to external interference like strong wind or air
conditioning. In this case, try to calibrate the altimeter. If the readings are constantly inaccurate, dirt may
be blocking the air pressure channels. In this case, send the cycling computer to a Polar Service Center.
...Memory low is displayed?
Memory low is displayed when there is approximately one hour of memory space left. Once the memory
has been depleted Memory full is displayed. To free memory space, transfer exercise data to Polar
ProTrainer 5 software, and delete from the cycling computer memory.
ENGLISH
Customer Service Information 67
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar CS 600X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar CS 600X in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polar CS 600X

Polar CS 600X Quick start guide - English - 31 pages

Polar CS 600X Quick start guide - German - 29 pages

Polar CS 600X User Manual - German - 65 pages

Polar CS 600X Quick start guide - Dutch - 29 pages

Polar CS 600X User Manual - Dutch - 68 pages

Polar CS 600X User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info