561266
3
Zoom out
Zoom in
Previous page
1/8
Next page
Welcome
Thank you for purchasing the Plugwise Energy Management System, the system that monitors and controls your
energy consumption.
This User Manual provides you with information about installing the system, the use of the software, technical
details and safety matters.
Installation
Install the software (Source)
Go to the site www.myplugwise.com and follow the steps as they appear on the screen.
Download the installation-file and execute the installation.
The installation-wizard starts up.
Follow the steps and press “complete” . The software will be installed automatically on your computer.
Extensive information will be found in the User Manual which will appear when you click on the
Question-Mark Icon, located on the lower right side of the program.
CONFIGURATION OF THE NETWORK
After the installation of the software is complete, the configuration- wizard starts up automatically.
Complete the steps ‘Welcome’ and ‘Licence’. You can find the Licence Code (25 characters) on the
installation list. If you cannot proceed after having filled in the Licence Code, please verify if you have
used the correct code and your firewall does not block the internet access. Allow the Plugwise Configuration
Wizart full access in your firewall . If needed , cancel the installation and complete the steps again.
The next step ‘Security’ of the wizard makes sure that your network is secure.
Part I: Registration of the plug-ID’s. Enter the plug-ID of the Circle+ and of the rest of the
Circle(s).
The plug-ID (five characters) is located on the sticker attached to the back of the plug. Do
not remove the sticker yet.
Part II: Enter your personal password. This will prevent undesirable third parties’ access to your
network.
Attention: your personal password must consist of a minimum of 6 and a maximum of 10
characters.
Unfold this User Manual for continuation of the installation process.
Be wise, plug in.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Plugwise Home Basic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Plugwise Home Basic in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info