680967
26
Zoom out
Zoom in
Previous page
1/28
Next page
26 | Adam
Issues with heating
The temperature settings of my
thermostat are missing
Adam retrieves the measured temperature
from your room thermostat and sends the
desired temperature to the thermostat
using the so called “override” functionality
of the OpenTherm protocol. It is up to the
thermostat to “do something” with this
temperature setting. Based on the
measured temperature and set
temperature the regulation determines
whether the boiler should start heating up
the house.
Thermostats that use OpenTherm do not
always do this in the same way. It is
possible that your thermostat does not
support above mentioned functionalities
or that you rst have to switch it on. Some
commonly used thermostats that have
been extensively tested and at that are
supported are:
» Plugwise Anna (24V)
» Honeywell Round Modulation
» Honeywell Chronotherm Touch
» Remeha iSense (after contact with support)
You can also install zone thermostat Lisa
instead of your existing central room
thermostat.
Is your thermostat not in this overview or
is it not working as mentioned, please do
not hestitate to contact Plugwise.
The boiler protocol is not detected
correctly
Check if Adam is connected to the
correct connections of the boiler.
Remove power from the boiler and
Adam.
Power up the boiler and wait until the
boiler has booted up.
Power up Adam an wait until it has
started up, the
light is on.
Check now if the correct boiler
protocol is detected: go via the menu
to Settings > Heating system > Boiler.
Not the correct boiler protocol? Click
update boiler protocol.
I have installed zone heating but my
house is no longer warming up
For zone heating to work properly, the
Plugwise regulation should be switched
on. You can check this in the local web
interface of Adam: Settings > Heating
system > Heating. When you switch on the
Plugwise regulation, the regulation of the
thermostat is being ignored.
Make sure that the heating source to
which you have connected Adam is the
only heating source in your heating system
and that Adam has full access to control
this heating source.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Plugwise Adam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Plugwise Adam in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info