Manual Plantronics VOYAGER 510S (page 15 of 16) (English)

670710

Zoom out

Zoom in

1/16

REGULATORY NOTICE

The radiated output power of this internal wireless radio

is far below the FCC radio frequency exposure limits.

Nevertheless, the wireless radio shall be used as

described in the manual.

The internal wireless radio operates within guidelines

found in radio frequency safety standards and

recommendations, which reflect the consensus of the

scientific community.

Plantronics therefore believes the internal wireless radio

is safe for use by consumers. The level of energy

emitted is far less than the electromagnetic energy

emitted by wireless devices such as mobile phones.

However, the use of wireless radios may be restricted

in some situations or environments, such as aboard

airplanes. If you are unsure of restrictions, you are

encouraged to ask for authorization before turning on

the wireless radio.

NOTE: Modifications not expressly approved by

Plantronics, Inc. could void the user’s authority to

operate the equipment.

This equipment complies with Part 68 of the FCC rules

and the requirements adopted by ACTA. On the

exterior of this equipment is a label that contains a

product identifier in the format US:AAAEQ##TXXXX. If

requested, this information must be provided to your

telephone company.

A plug and jack used to connect this equipment to the

premises wiring and telephone network must comply

with the applicable FCC Part 68 rules and

requirements adopted by ACTA. A compliant

telephone cord and modular plug is provided with this

product. It is designed to be connected to a

compatible jack that is also compliant. See installation

instructions for details.

The REN is useful to determine the quantity of devices

you may connect to your telephone line. Excessive

RENs on a telephone line may result in the devices not

ringing in response to an incoming call. In most, but

not all areas, the sum of the RENs should not exceed

five (5.0). To be certain of the number of devices you

may connect to your line, as determined by the REN,

contact your local telephone company. For product

approved after July 23, 2001, the REN for this

product is part of the product identifier that has the

format US:AAAEQ##TXXXX. The digits represented by

### are the REN without the decimal point. (For

example, 03 represents a REN of 0.3.) For earlier

producers, the REN is separately shown on the label.

If this telephone equipment causes harm to the

telephone network, the telephone company will notify

you in advance that temporary discontinuance of

service may be required. But if advance notice isn’t

practical, the telephone company will notify the

customer as soon as possible. Also, you will be

advised of your right to file a complaint with the FCC

if you believe it is necessary.

The telephone company may make changes in its

facilities, equipment, operations, or procedures that

could affect the proper functioning of your equipment.

If they do, you will be notified in advance in order for

you to make necessary modifications to maintain

uninterrupted service.

If trouble is experienced with this unit, for repair or

warranty information, please contact customer service

at (800) 544-4660 ext. 5538. If the equipment is

causing harm to the network, the telephone company

may request that you disconnect the equipment until

the problem is resolved.

DO NOT DISASSEMLE THIS EQUIPMENT: it does not

contain any user serviceable components.

We recommend the installation of an AC surge

arrester in the AC outlet to which this equipment is

connected. Telephone companies report that electrical

surges, typically lighting transients, are very destructive

to customer terminal equipment connected to AC

power sources.

EXPOSURE TO RADIO FREQUENCY RADIATION

FCC REGISTRATION INFORMATION

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference;

and

2. This device must accept any interference received,

including interference that may cause undesired

operation.

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to

radio communications. However, there is no

guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Plantronics VOYAGER 510S in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Plantronics VOYAGER 510S Manual

Product: