577749
5
Zoom out
Zoom in
Previous page
1/36
Next page
English
Français
Deutsch
Nederlands
Italiano
Español
5
En
Connecting to network
© 2014 PIONEER HOME ELECTRONICS CORPORATION.
All rights reserved.
The following is one example of how to connect to a network.
For other connections, please refer to the attached Operating Instructions (CD-ROM)
Connecting this receiver using
wireless LAN
Connecting this receiver using
wired LAN
1. Be sure your router supports DHCP server
function.
2. Use the LAN cable to connect this receiver
and your router.
3. Plug the power cord into an AC outlet.
Press
STANDBY/ON.
B: Connecting to a router with WPS-
PBC function
1. Be sure the LAN cable is not connected to
the receiver.
2. Plug the power cord into an AC outlet.
Press
STANDBY/ON.
3. Press NET SERVICE

SETUP on the
remote control.
4. Select Network Setting

WPS.
5. Use

to select PBC (Push Button
Con guration) and then press ENTER.
6. Press the WPS button on the router.
If the connection does not succeed, refer
to Operating Instructions (CD-ROM) (page
44) and redo the setting again.
PBC (Push Button Con guration)
The wireless connection setting is
automatically con gured by pressing
the WPS button on the WPS compatible
wireless LAN device.
C: Connecting to a router without
WPS-PBC function
1. Be sure the LAN cable is not connected to
the receiver.
2. Plug the power cord into an AC outlet.
Press

STANDBY/ON.
3. Press NET SERVICE

SETUP.
The Initial Setup screen is shown on the
display.
4. Select Network Setting

Network
Con guration.
5. Use

to select Wireless, then press
ENTER.
Wireless
Wired
Network Configuration
6. Use

to select Auto, then press
ENTER.
Manual
Wireless Accessory Configuration
Web Control
Auto
Wireless
7. Use

to select the available wireless
network you want to connect to, then press
ENTER.
The receiver will only display the names of
2.4 GHz wireless LAN routers (SSID).
A: Connection settings using an iOS
device (with iOS 5.0 or later)
You can apply iPod/iPhone/iPad (iOS device
with iOS ver 5.0 or later)'s Wi-Fi settings to
this receiver.
1. Be sure the LAN cable is not connected to
the receiver. Unlock your iPod/iPhone/iPad.
2. Plug the power cord into an AC outlet.
Press
STANDBY/ON.
3. Unlock your iPod/iPhone/iPad. Check that
the Wi-Fi mark is displayed on the iOS
device screen.
Share Wi-Fi Settings?
Ignore
4. Press iPod/USB on the remote control.
Connect the iOS device to the USB
terminal.
5. Press SETUP.
6. Select Network Setting
Network
Con guration
Wireless
iOS Device
and then press ENTER.
7. Tap Allow on iPod/iPhone/iPad.
Share Wi-Fi Settings?
Ignore
The Wi-Fi settings of your iPod/iPhone/
iPad are applied to the receiver.
XXXXXXXXX
Available Wireless Networks
XXXXXXXXXXXXXXXX
XX
va
va
a
a
e
e
re
ere
ess
ss
etwoetwor
r
8. Use

to enter the Pass Phrase or
WEP Key.
Enter Password
[REPEAT] Change Text
Delete One Character[CLEAR]
A

: Moves the adjusting digit.

: Changes displayed character.
REPEAT: Switches character types.
CLEAR: Deletes one character at a time.
9. Use

to select DHCP On, then press
ENTER.
Select Don’t Use Proxy Server, then
press ENTER.
DHCP Off
DHCP On
Network Configuration
10. In order to activate the setup, press
ENTER
.
Refer to Operating Instructions (CD-ROM)
(Connection method 4 | Have the receiver
automatically detect the wireless LAN
router and perform settings on page 33)
and redo the setting again.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer X-HM82-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer X-HM82-K in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 11,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer X-HM82-K

Pioneer X-HM82-K User Manual - English - 63 pages

Pioneer X-HM82-K User Manual - German - 63 pages

Pioneer X-HM82-K User Manual - Dutch - 63 pages

Pioneer X-HM82-K User Manual - Danish - 184 pages

Pioneer X-HM82-K User Manual - French - 63 pages

Pioneer X-HM82-K User Manual - Italian - 63 pages

Pioneer X-HM82-K User Manual - Swedish - 184 pages

Pioneer X-HM82-K User Manual - Turkish - 64 pages

Pioneer X-HM82-K User Manual - Spanish - 63 pages

Pioneer X-HM82-K User Manual - Finnish - 184 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info