574203
41
Zoom out
Zoom in
Previous page
1/43
Next page
Additional information
11
41
En
English
Note
If the unit does not operate normally due to external
effects such as static electricity.
Disconnect the power plug from the outlet and insert
again to return to normal operating conditions.
Surround sound formats
Below is a brief description of the main surround sound
formats you’ll find on DVDs, satellite, cable and
terrestrial broadcasts, and video cassettes.
Dolby Digital
You can identify Dolby Digital encoded source by the
following logo:
1
Dolby Digital is a multichannel digital audio coding
system widely used for DVD and digital broadcast
soundtracks. It can deliver up to six discrete audio
channels, comprising five full range channels and a
special LFE (low frequency effects) channel used mainly
for deep, rumbling sound effects; hence the term “5.1-
channel” Dolby Digital.
Dolby Pro Logic II and Dolby Surround
Dolby Pro Logic (and Pro Logic II) is a
decoding
system
that can extract four (five for Pro Logic II) channel
surround sound (front left/right, center, and surround
channels) from any stereo source.
Dolby Surround is an
encoding
system which embeds
surround sound information within a stereo soundtrack,
which a Dolby Pro Logic decoder can then use for
enhanced surround sound.
You can identify a Dolby Surround encoded source by the
following logo:
3
DTS Digital Surround
You can identify a DTS Digital Surround encoded source
by the following logo:
DTS Digital Surround is a 5.1-channel audio encoding
system from Digital Theater Systems Inc. for DVD
soundtracks. Like Dolby Digital, it provides six discrete
channels of audio, including an LFE channel.
The receiver cannot be remote
controlled.
• The remote control batteries have worn out. • Replace the batteries (see page 3).
• You are too far away or at a bad angle for
operation.
• Operate within 7 m, 30° of the remote sensor on the
front panel (see page 21).
• There is an obstacle between the receiver
and the remote control.
• Remove the obstacle or operate from another angle of
position.
• Strong light such as fluorescent light. • Avoid exposing the remote sensor on the front panel to
direct light.
• The
CONTROL IN
jack has been hooked up. • Disconnect the
CONTROL IN
jack.
Other components cannot be
remote controlled.
• The proper code hasn't been input into the
remote control to control that component.
• Input the proper code into the remote control (see
page 34).
• The remote control is in a mode to make
some setting or control something on the
receiver.
• Press the button of the component you want to control.
• Something is plugged into the
CONTROL IN
jack (see page 17).
• Either point remote at the remote sensor of the unit that
is plugged into the
CONTROL IN
jack or unplug the cable
from the
CONTROL IN
jack and use remote normally.
The shutter of the optical
terminal doesn’t close after
removing plug.
• The plug was inserted improperly. • The terminal is fine but the shutter won’t close.
Symptom
Cause Remedy
vsx-c302_FL.book 41 ページ 2004年5月10日 月曜日 午後5時8分
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-C302-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-C302-S in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info