If the speaker cords short (touch each other or the metal casing), you will not only lose the
sound from the speakers, but the system may also be damaged as a result. Please read the
guidelines below carefully and take care to connect the speaker cords correctly.
When connecting the speakers, make sure that the exposed wire of each
speaker cord does not touch anything other than the correct speaker terminal.
No Good!
OK!
Make sure that exposed
speaker wire strands do not
touch the exposed wire from
any other speaker cord.
Make sure that exposed
speaker wire does not extend
outside the speaker terminal
and touch any other wire.
Make sure that exposed
speaker wire does not touch
the rear panel, screws, etc.
1Remove about 10 mm (3/8 in.)
of the plastic insulation and
twist together the exposed
speaker wire.
2Unscrew the speaker terminal,
and fully insert the speaker
cord so that no exposed
speaker wire extends outside
the terminal.
3Tighten the speaker terminal
to secure the speaker cord.
Check that all the speaker cords are properly connected at both the
amplifier and the speaker ends.
10mm (3/8 in.)
1
2
3
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Pioneer VSX-C300 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Pioneer VSX-C300 in the language / languages: English as an attachment in your email.
The manual is 0,39 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.