699667
5
Zoom out
Zoom in
Previous page
1/41
Next page
5
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting the left and right front speakers (L/R), the center speaker (C), the left and right
surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speakers as shown below.
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound. The
following guidelines should help you to get the best sound from your system.
The subwoofer can be placed on the floor. Ideally, the other speakers should be at about
ear-level when you’re listening to them. Putting the speakers on the floor (except the
subwoofer), or mounting them very high on a wall is not recommended.
For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from
the TV.
If you’re going to place speakers around your CRT TV, use shielded speakers or place the
speakers at a sufficient distance from your CRT TV.
If you’re using a center speaker, place the front speakers at a wider angle. If not, place
them at a narrower angle.
Place the center speaker above or below the TV so that the sound of the center channel is
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
It is best to angle the speakers towards the listening position. The angle depends on the
size of the room. Use less of an angle for bigger rooms.
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should be more directly
behind the listener than for home theater playback.
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sound effect.
CAUTION
Make sure that all speakers are securely installed. This not only improves sound quality,
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
120
120
SL
L
SW
C
R
SR
5.1 channel surround system:
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting the left and right front speakers (L/R), the center speaker (C), the left and right
surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speakers as shown below.
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound. The
following guidelines should help you to get the best sound from your system.
The subwoofer can be placed on the floor. Ideally, the other speakers should be at about
ear-level when you’re listening to them. Putting the speakers on the floor (except the
subwoofer), or mounting them very high on a wall is not recommended.
For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from
the TV.
If you’re going to place speakers around your CRT TV, use shielded speakers or place the
speakers at a sufficient distance from your CRT TV.
If you’re using a center speaker, place the front speakers at a wider angle. If not, place
them at a narrower angle.
Place the center speaker above or below the TV so that the sound of the center channel is
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
It is best to angle the speakers towards the listening position. The angle depends on the
size of the room. Use less of an angle for bigger rooms.
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should be more directly
behind the listener than for home theater playback.
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sound effect.
CAUTION
Make sure that all speakers are securely installed. This not only improves sound quality,
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
120
120
SL
L
SW
C
R
SR
5.1 channel surround system:
2
2
2
8
35
4
Connecting your equipment
Placing the speakers
By connecting the left and right front speakers (L/R), the center speaker (C), the left and right
surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be
enjoyed.
To achieve the best possible surround sound, install your speakers as shown below.
Hints on the speaker placement
Where you put your speakers in the room has a big effect on the quality of the sound. The
following guidelines should help you to get the best sound from your system.
The subwoofer can be placed on the floor. Ideally, the other speakers should be at about
ear-level when you’re listening to them. Putting the speakers on the floor (except the
subwoofer), or mounting them very high on a wall is not recommended.
For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from
the TV.
If you’re going to place speakers around your CRT TV, use shielded speakers or place the
speakers at a sufficient distance from your CRT TV.
If you’re using a center speaker, place the front speakers at a wider angle. If not, place
them at a narrower angle.
Place the center speaker above or below the TV so that the sound of the center channel is
localized at the TV screen. Also, make sure the center speaker does not cross the line
formed by the leading edge of the front left and right speakers.
It is best to angle the speakers towards the listening position. The angle depends on the
size of the room. Use less of an angle for bigger rooms.
The optimal positioning for surround speakers is just above ear height. Make sure the
speakers don’t face each other. For DVD-Audio, the speakers should be more directly
behind the listener than for home theater playback.
Try not to place the surround speakers farther away from the listening position than the
front and center speakers. Doing so can weaken the surround sound effect.
CAUTION
Make sure that all speakers are securely installed. This not only improves sound quality,
but also reduces the risk of damage or injury resulting from speakers being knocked over
or falling in the event of external shocks such as earthquakes.
120
120
SL
L
SW
C
R
SR
5.1 channel surround system:
Ohjaimet ja näytöt
1
1
Controls and displays
1
1
5
2
35
4
Display
15
PHASE
Lights when the Phase Control is switched on (page 27).
16
AUTO
Lights when the Auto Surround feature is switched on
(page 25
).
17
Tuner indicators
RDS – Lights when an RDS broadcast is received
(page 23
). (For Europe)
ST – Lights when a stereo FM broadcast is being
received in auto stereo mode (page 22
).
TUNE – Lights when a normal broadcast channel.
PRESET – Shows when a preset radio station is
registered or called.
MEM – Blinks when a radio station is registered.
MHz – Lights when the character display is showing the
currently received FM broadcast frequency.
18
Speaker indicators
Shows if the speaker system is on or not (page 4).
SPA means the speakers are switched on.
SP means the speakers are switched off.
19
Sleep timer indicator
Lights when the receiver is in sleep mode (page 6).
20
PRESET information or input signal indicator
Shows the preset number of the tuner or the input signal
type, etc.
21
Character display
Displays various system information.
22
DTS indicators
DTS – Lights when a source with DTS encoded audio
signals is detected.
HD – Lights when a source with DTS-EXPRESS or DTS-
HD encoded audio signals is detected.
96/24 – Lights when a source with DTS 96/24 encoded
audio signals is detected.
NEO:6 – When one of the NEO:6 modes of the receiver
is on, this lights to indicate NEO:6 processing (page 25
).
23
Dolby Digital indicators
D – Lights when a Dolby Digital encoded signal is
detected.
D+ – Lights when a source with Dolby Digital Plus
encoded audio signals is detected.
HD – Lights when a source with Dolby TrueHD
encoded audio signals is detected.
PLIILights to indicate Pro Logic II decoding (see
Listening in surround sound
on page 25 for more on this).
24
ADV.S.
Lights when one of the Advanced Surround modes has been
selected (see Using the Advanced surround
on page 26 for
more on this).
25
SIGNAL SELECT indicators
DIGITALLights when a digital audio signal is selected.
Blinks when a digital audio signal is selected and
selected audio input is not provided.
HDMI – Lights when an HDMI signal is selected. Blinks
when an HDMI signal is selected and selected HDMI
input is not provided.
26
DIR.
Lights when the DIRECT or PURE DIRECT mode is
switched on (page 26
).
15 16 17 18 19 17
22 23 24 25 25 26
20
21
15
PHASE
Palaa, kun Phase Control on päällä (sivu 27).
16
AUTO
Palaa, kun Auto Surround -ominaisuus on päällä
(sivu 25).
17
Virittimen merkkivalot
RDS – Palaa, kun vastaanotetaan RDS-lähetystä
(sivu 23).
ST – Palaa, kun FM-stereolähetystä vastaanotetaan
auto stereotilassa (sivu 22).
TUNE – Palaa vastaanotettaessa normaalia kanavaa.
PRESET – Ilmaisee tallennettavan tai ladattavan
radioaseman numeron.
MEM – Vilkkuu tallennettaessa radioasemaa.
MHz – Syttyy, kun merkkinäytössä on parhaillaan
vastaanotettavan FM-lähetyksen taajuus.
18
Kaiuttimien merkkivalo
Ilmaisee, ovatko kaiuttimet päällä vai ei (sivu 4).
SP A Kaiuttimet ovat päällä.
SP Kaiuttimet eivät ole päällä.
19
Uniajastimen merkkivalo
Syttyy, kun uniajastin on käytössä.
20
PRESET tietoa tai tulosignaalin ilmaisin
Näyttää virittimen tallennuksen numeron tai tulosignaalin
tyypin ym.
Näyttöruutu
21
Merkkinäyttö
Näyttää erilaisia tietoja järjestelmästä.
22
DTS-ilmaisimet
DTS – Syttyy, kun havaitaan äänilähde, josta tulee
DTS-koodattu audiosignaali.
HD - Syttyy, kun havaitaan äänilähde, josta tulee
DTS-EXPRESS- tai DTS-HD-koodattu audiosignaali.
96/24 - Syttyy, kun havaitaan äänilähde, josta tulee
DTS 96/24-koodattu audiosignaali
NEO:6 – Merkkivalo ilmaisee NEO:6-prosessoinnin,
kun jokin laitteen NEO:6-tiloista on päällä.
23
Dolby Digital-merkkivalot
D – Syttyy, kun havaitaan Dolby Digital -koodattu
signaali.
D+ – Syttyy, kun havaitaan Dolby Digital Plus
-koodattu audiosignaali.
HD – Syttyy, kun havaitaan Dolby True HD
-koodattu audiosignaali.
PLII – Syttyy, kun havaitaan Pro Logic
-dekoodaus. (Katso lisää kohdasta Kuuntelu
surroundäänen kanssa, sivu 25).
24
ADV.S.
Syttyy, kun valittuna on jokin Advanced Surround -tiloista.
(Katso lisää kohdasta Laajennetun surroundäänen käyttö,
sivu 26).
25
SIGNAL SELECT –merkkivalot
DIGITAL – Syttyy, kun valittuna on digitaalinen
audiosignaali. Vilkkuu, jos digitaalinen audiosignaali
on valittu, mutta valittua audiotuloa ei ole.
HDMI – Syttyy, kun HDMI-signaali on valittu. Vilkkuu,
jos HDMI-signaali on valittu, mutta valittua HDMI-tuloa
ei ole.
26
DIR
Syttyy, kun tila DIRECT tai PURE DIRECT on päällä
(sivu 26).
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-531D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-531D in the language / languages: Finnish as an attachment in your email.

The manual is 10,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-531D

Pioneer VSX-531D User Manual - English - 41 pages

Pioneer VSX-531D User Manual - German - 41 pages

Pioneer VSX-531D User Manual - Dutch - 41 pages

Pioneer VSX-531D User Manual - French - 41 pages

Pioneer VSX-531D User Manual - Italian - 41 pages

Pioneer VSX-531D User Manual - Spanish - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info