Manual Pioneer VSX-321-K-P (page 25 of 64) (English)

574065

Zoom out

Zoom in

1/64

The System Setup menu

English

ϜН

Español

Chapter 5:

The System Setup menu

Using the System Setup menu

The following section shows you how to make detailed

settings to specify how you’re using the receiver, and also

explains how to fine-tune individual speaker system settings

to your liking.

Important

• If headphones are connected to the receiver, disconnect

them.

1Press

 RECEIVER

to switch the receiver on.

2 Press , then press SETUP.

The System Setup menu appears on the front panel display.

Use /// and ENTER on the remote control to

navigate through the screens and select menu items. Press

RETURN to confirm and exit the current menu.

• Press SETUP at any time to exit the System Setup menu.

3 Select the setting you want to adjust.

• SP SETUP

SP SET – Specify the size and number of speakers you’ve

connected (see below).

X.OVER – Specify which frequencies will be sent to the

subwoofer (see below).

CH LEVEL – Adjust the overall balance of your speaker

system (page 26).

SP DISTN – Specify the distance of your speakers from

the listening position (page 26).

• HDMI SET – Set when using the ARC function. (see ARC

Setup on page 27).

• APD – Sets to automatically turn off the power when the

receiver has not operated for several hours (see The Auto

Power Down menu on page 26).

• FL DEMO – Sets the demo display on the front panel

display (see The FL Demo Mode menu on page 26).

The Speaker Setup menu

This receiver allows you to make detailed settings to optimize

the surround sound performance. You only need to make

these settings once (unless you change the placement of

your current speaker system or add new speakers).

Speaker Setting

Use this setting to specify your speaker configuration (size,

number of speakers).

1Use

/

to select ‘SP SETUP’ from the System Setup

menu, then press ENTER.

2Use

/

to select ‘SP SET’ from the SP SETUP menu,

then press ENTER.

3Use

/

to select the set of speakers that you want to

set then select a speaker size.

Use / to select the size (and number) of each of the

following speakers:

• F (Front) –Do not change from SMALL.

• C (Center) – Select SMALL if you connect a center. If you

didn’t connect a center speaker, choose NO (the center

channel is sent to the other speakers).

• S (Surround) – Select SMALL if you connect a surround

speakers. If you didn’t connect surround speakers choose

NO (the sound of the surround channels is sent to the

other speakers).

• SB (Surround Back) – Select the number of surround

back speakers you have (one (X1), two (X2) or none). If

you didn’t connect surround back speakers choose NO.

If you select one surround back speaker only, make sure

that additional amplifier is hooked up to the PRE OUT L

(Single) terminal.

• SW (Subwoofer) – LFE signals and bass frequencies of

channels set to SMALL are output from the subwoofer

when YES is selected (see notes below). Choose the PLUS

setting if you want the subwoofer to output bass sound

continuously or you want deeper bass (the bass

frequencies that would normally come out the front and

center speakers are also routed to the subwoofer). If you

did not connect a subwoofer choose NO (the bass

frequencies are output from other speakers).

4 When you’re finished, press RETURN.

You return to the Speaker Setup menu.

Note

• If you select SMALL for the front speakers, the subwoofer

will automatically be fixed to YES. Also, the center,

surround and surround back speakers can’t be set to

LARGE (L) if the front speakers are set to SMALL. In this

case, all bass frequencies are sent to the subwoofer.

• If the surround speakers are set to NO, the surround back

speakers will automatically be set to NO.

• If you have a subwoofer and like lots of bass, it may seem

logical to select LARGE for your front speakers and PLUS

for the subwoofer. This may not, however, yield the best

bass results. Depending on the speaker placement of

your room you may actually experience a decrease in the

amount of bass due to low frequency cancellations. In

this case, try changing the position or direction of

speakers. If you can’t get good results, listen to the bass

response with it set to PLUS and YES or the front speakers

set to LARGE and SMALL alternatively and let your ears

judge which sounds best. If you’re having problems, the

easiest option is to route all the bass sounds to the

subwoofer by selecting SMALL for the front speakers.

• LARGE setting is not use with this system. If each speaker

is connected, select the SMALL setting.

• Do not change the crossover frequency from 200 Hz.

Crossover Network

• Default setting: 200Hz

This setting decides the cutoff between bass sounds playing

back from the speakers selected as LARGE, or the subwoofer,

and bass sounds playing back from those selected as

SMALL. It also decides where the cutoff will be for bass

sounds in the LFE channel.

• For more on selecting the speaker sizes, see Speaker

Setting on page 25.

INPUT SELECT

SOURCESLEEP

CONTROL

INPUT

RECEIVER

BD DVD TV

DVR/BDR

CD R

DTV/TV

ENTER

MUTE

RETURN

PARAMETER

TOOLS

VOLUME

BAND

TOP

HOME

SETUP

PTY SEARCH

RECEIVER

05_system_setup.fm 25 ページ２０１１年９月１日　木曜日　午後８時１６分

Only one hdmi input works
Is there a place I can download a schematic diagram Submitted on 17-12-2019 at 04:45
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-321-K-P in the language / languages: English as an attachment in your email.

The manual is 12,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-321-K-P

Pioneer VSX-321-K-P User Manual - English, French - 60 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer VSX-321-K-P Manual

Product: