611818
1
Zoom out
Zoom in
Previous page
1/4
Next page
Sensor firmware update method using the SGX-CA500
Note:
The firmware update may take about 2 hours. (It depends on the surrounding radio wave environment)
If the update process has been interrupted, you need operate the update process from the beginning.
If the update has not been completed successfully, the sensor(s) will not be able to carry out the
measurement.
Preparation:
Please update to the SGX-CA500s firmware to the latest version.
Please ensure the SGX-CA500 is fully charged.
1. Wake-up of the sensor
Rotate the crank more than three times to wake up the sensor
2. The placement of the SGX-CA500
. In order to stabilize the communication between the SGX-CA500 and the sensor(s), you need to place the
SGX-CA500 within 10 inches from the sensor(s).
Set the SGX-CA500 as shown in the following photos while the update process has been started.
The following pictures show the recommendation of the SGX-CA500 placement.
3. Pairing
If the sensor(s) are not paired with the SGX-CA500, Connect the sensor(s) via [Sensors] menu.
[MENU]-[Sensors]-[Connect New]--[Pedaling Monitor L]
[MENU]-[Sensors]-[Connect New]--[Pedaling Monitor R]
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SGX-CA500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SGX-CA500 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SGX-CA500

Pioneer SGX-CA500 User Manual - English - 312 pages

Pioneer SGX-CA500 Quick start guide - English - 172 pages

Pioneer SGX-CA500 User Manual - English - 64 pages

Pioneer SGX-CA500 User Manual - German - 312 pages

Pioneer SGX-CA500 Quick start guide - German - 172 pages

Pioneer SGX-CA500 User Manual - German - 64 pages

Pioneer SGX-CA500 User Manual - Dutch - 312 pages

Pioneer SGX-CA500 Quick start guide - Dutch - 172 pages

Pioneer SGX-CA500 User Manual - Dutch - 64 pages

Pioneer SGX-CA500 User Manual - French - 312 pages

Pioneer SGX-CA500 Quick start guide - French - 172 pages

Pioneer SGX-CA500 User Manual - French - 64 pages

Pioneer SGX-CA500 User Manual - Italian - 312 pages

Pioneer SGX-CA500 Quick start guide - Italian - 172 pages

Pioneer SGX-CA500 User Manual - Italian - 64 pages

Pioneer SGX-CA500 Quick start guide - Spanish - 172 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info