Manual Pioneer S-SL100CR (page 5 of 80) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

455335

Zoom out

Zoom in

1/80

English

Connection

Connecting the cord

1 Attach one end of the supplied speaker cord to the rear

of the each speaker.

• Connect the wire with the colored marker to the red (+)

terminal; the plain wire to the black (–) terminal. Press down

the spring-loaded tab and insert the wire, as shown below.

Release the tab to secure the wire.

2 Connect the other ends of the cords to the amp’s speaker

output terminals (for more details, refer to your amp

instruction manual).

• These speaker terminals carry HAZARDOUS LIVE voltage. To

prevent the risk of electric shock when connecting or

disconnecting the speaker cords, disconnect the power cord

before touching any uninsulated parts.

• After connecting the plugs, pull lightly on the cords to make

sure that the ends of the cords are securely connected to the

terminals. Poor connections can create noise and

interruptions in the sound.

• If the cords’ wires happen to be pushed out of the terminals,

allowing the wires to come into contact with each other, it

places an excessive additional load on the receiver. This may

cause the amp to stop functioning, and may even damage the

receiver.

• When using a set of speakers connected to an receiver, you

won’t be able to obtain the normal stereo effect if the polarity

(+, –) of one of the speakers (left or right) is reversed.

Operation (S-SL100-LR/S-SL100CR)

Since the S-SL100-LR/S-SL100CR are designed as compact

satellite speakers, it is recommended that they be used in

combination with a sub-woofer to provide full base sound. In this

case, set your amplifier (receiver) speaker setting to “small” and

the crossover frequency to 200 Hz.

Specifications

S-SL100-LR/S-SL100CR

Enclosure. . . . . . . . Closed-box bookshelf type (magnetically shielded)

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . 10 cm x 7 cm, full range

Impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Ω

Frequency range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Hz to 20 kHz

Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 dB

Maximum input power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 W

Exterior dimensions . . . . . . 86.5 (W) mm x 206 (H) mm x 85.5 (D) mm

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7 kg

Supplied accessories (S-SL100-LR)

Speaker cord (4 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Non-skid pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Warranty card (European model only) . . . . . . . . . . . . . . . . . . . . . . . . . 1

Operating instructions (this document)

Supplied accessories (S-SL100CR)

Speaker cord (4 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Speaker cord (10 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Non-skid pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Warranty card (European model only) . . . . . . . . . . . . . . . . . . . . . . . . . 1

Operating instructions (this document)

S-SLW500

Enclosure. . . . . . . . . . . . . . . . . . . . . . . . . . . . Bass-reflex bookshelf type

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 cm cone

Impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Ω

Frequency range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Hz to 2.0 kHz

Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78 dB

Maximum input power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 W

Exterior dimensions

Horizontal orientation. . . . 435 (W) mm x 121 (H) mm x 360 (D) mm

Vertical orientation . . . . .108.5 (W) mm x 435 (H) mm x 360 (D) mm

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 kg

Supplied accessories

Speaker cord (3 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Non-skid pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Warranty card (European model only) . . . . . . . . . . . . . . . . . . . . . . . . . 1

• The S-SL100-LR is shipped with two speaker systems per

package.

• The S-SL100CR is shipped with three speaker systems per

package.

• Specifications and design subject to possible modification

without notice, due to improvements.

is a trademark placed on a product with Pioneer’s Phase

Control technology. This technology enables high-grade sound

reproduction through each component by improving overall

phase matching.

Red (+)

Black (–)

Red colored marker

S-SL100-LR_S-SL100CR_En.fm 5 ページ２０１１年４月１２日　火曜日　午前１１時３１分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer S-SL100CR in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer S-SL100CR Manual

Product: