811500
3
Zoom out
Zoom in
Previous page
1/6
Next page
En En En En
D. Guideline (On/Off)
This is used to switch the vertical and
horizontal guidelines on and off.
1. Press the ENTER button.
2. Select on or off for the guidelines
with the + and – buttons.
3. Press the ENTER button.
4. Press the ENTER button twice.
Return to step 5 of “Changing Basic
Settings or Other Settings”.
Returning to Default
Settings
The product can be reset to the default settings.
Reset to default settings in the following
situations:
The position of the camera has changed.
The vehicle on which the camera is installed has
changed.
1. Press the MODE and ENTER but-
tons simultaneously.
Note:
Press the MODE button to cancel resetting to
default settings.
2. Press the ENTER button.
All of the settings are returned to the
default settings.
Screen Display
Two types of screen displays are available with
this product.
Normal Angle Mode:
This is used when displaying the normal rear
view camera image.
Vertical guidelines
Horizontal guidelines
High Angle Mode:
This displays the view from directly overhead.
Changing the Screen
Display Mode
1. Press the MODE button when the
rear view camera image is displayed.
The screen display mode changes in the
manner described below each time the
MODE button is pressed.
Normal angle mode High angle mode
Note:
The screen display mode returns to the normal
angle mode prior to being changed when the
engine is turned off.
Optional Advanced Setup
Preparation
To improve accuracy, the optional setup will
use a grid of masking tape to provide a visual
representation similar to the on-screen setting
of the system. To complete this procedure,
you will need approximately 54 feet (18 yards)
(16.5 meter) of 2 inch (5 centimeter) wide
masking tape (or wider).
Please see the image below and follow these
steps to complete the procedure:
1) Cut one strip of masking tape equal
to the width of the vehicle. Place the
masking tape on the parking surface
approximately 3 feet (1 meter) from
and parallel to the rear bumper. This
strip of masking tape will be the
indicator used to adjust the RED line in
Advanced Settings – Step C. Guideline
(Distance).
2) Cut two strips of masking tape,
approximately 15 feet (4.5 meter) in
length, and place them on the parking
surface in the position shown in the
image below, parallel to the sides of the
vehicle and extending to the rear. These
strips represent the width of the vehicle,
and will be used instead of the painted
parking lines in both the Basic Settings
and Advanced Settings.
3) Cut one strip of masking tape,
approximately 15 feet (4.5 meter) in
length, and place on the parking surface
from the center of the rear bumper
extending back. This strip will indicate
the centerline of the vehicle and will
be used in both the Basic Settings and
Advanced Settings.
Step 1
Step 3
Step 2
Discrepancies Between Screen
Display and Actual Road Surfac
e
Discrepancies in distance and the course over
which the vehicle is traveling may occur
between the horizontal guidelines on the
screen and actual road surface in the following
situations.
When there is a steep upgrade behind the
vehicle:
The horizontal guidelines serve as a reference
for distance relative to a flat road surface.
Consequently, when there is a steep upgrade
behind the vehicle, the horizontal guidelines
appear closer to you than the actual distances.
For example, in the case of an obstacle present
on a steep upgrade, the obstacle appears to
be farther away than it actually is. Similarly,
discrepancies also occur in the course over
which the vehicle is traveling between the
horizontal guidelines and the actual road
surface.
Horizontal guidelines
Vehicle status
Discrepancy
When there is a steep downgrade behind
the vehicle:
When there is a steep downgrade behind
the vehicle, the horizontal guidelines appear
farther to the rear than the actual distances.
When there is an obstacle present on a steep
downgrade, the obstacle appears to be closer
than it actually is. Similarly, discrepancies also
occur in the course over which the vehicle is
traveling between the horizontal guidelines and
the actual road surface.
Horizontal guidelines
Vehicle status
Discrepancy
When the vehicle is on an incline:
Discrepancies may occur between the display
and the actual distance and course over which
the vehicle is traveling when the vehicle is on
an incline due to the number of passengers or
payload.
Vehicle status
Discrepancy
Specifications
Common Units
Power source ......................................................... DC 14.4 V (allowable range: 10.8 V to 15.1 V)
Grounding system ................................................. Negative ground type
Max. current consumption .................................... Approx. 250 mA
Output image ........................................................ Mirror image (for rear view confirmation)
Video output .......................................................... 1 Vp-p (75 Ω)
External Dimensions
Rear view camera ................................................. 27 (W) × 27 (H) × 26 (D) mm
1 (W) × 1 (H) × 1 (D) in.
Image processing unit power supply ..................... 84 (W) × 20 (H) × 65 (D) mm
3-1/4 (W) × 3/4 (H) × 2-1/2 (D) in.
Button unit ............................................................. 27 (W) × 27 (H) × 13 (D) mm
1 (W) × 1 (H) × 1/2 (D) in.
Weights
Rear view camera ................................................. 150 g (0.3 lbs) (including cable)
Image processing unit power supply ..................... 200 g (0.44 lbs) (including power cord)
Button unit ............................................................. 95 g (0.2 lbs) (including cable)
Camera Unit
Imaging sensor ...................................................... 1/4-inch color CCD sensor
No. of pixels .......................................................... 492 (vertical) × 512 (horizontal)
(total no. of pixels: approx. 270 000, effective
no. of pixels: approx. 250 000)
Lens ....................................................................... Wide-angle, focal length: 1.53 mm, F value: 2.8
Angle of view ....................................................... Horizontal: approx. 135˚, vertical: approx. 100˚
IR cutoff (special vehicle-mounted) filter ............. Provided
Iris system .............................................................. Electronic iris
Scanning system .................................................... Interlace
Synchronizing system ............................................ Internal synchronization
Signal-to-noise ratio .............................................. 40 dB or more
Horizontal resolution ............................................. Approx. 300 TV lines
Illumination range ................................................. Approx. 1.5 lux to 100 000 lux
Operating temperature range ................................. −30 ˚C to +70 ˚C
−22 ˚F to +158 ˚F
Storage temperature range ..................................... −40 ˚C to +85 ˚C
−40 ˚F to +185 ˚F
Note:
Specifications and the design are subject to possible modification without prior notice due to improvements.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer ND-BC20PA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer ND-BC20PA in the language / languages: English, Spanish as an attachment in your email.

The manual is 1.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer ND-BC20PA

Pioneer ND-BC20PA Installation Guide - English, German, French, Italian, Spanish - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info